[FS] 425 HP - 1996 Firebird Formula WS6, Black Ext, Grey Leather Interior, 6 Speed, T-tops

[NorthernPaladin]

425 HP - 1996 Firebird Formula WS6, Black exterior with Grey Leather Interior, A/C, 6 Speed Manual, T-Tops, Stereo CD with EQ... (basically fully loaded). I purchased the car in 1999 and am the 2nd Owner. This car only gets Synthetic oil (German Castrol) and I have a few cases that go with the car. This car has only gone through one winter and is in very good shape with no body rust. New tires were put on in the first week of June as well as new rotors in the back and new pads in the front. Everything works, it runs excellent, is very fast and handles very well. With a family and toddler I have no time for this car and so I am reluctantly putting my first baby up for sale.
123,324 km
10,000 - Firm

Will sell certified for additional $200
Will sell with emissions test done for additional $200

---------------------------------------
Modifications:
52mmThrottle Body,
Throttle Body - Bypass (coolant is not passed through the throttle body)
30 # SVO fuel injectors
ARE (Agostino racing) Stage 2 Heads with 7/16 studs,Pro-Magnum Roller Rocker Arms with 1.6 Ratio (Flow sheet available upon request)
Hardend pushrods (and some good springs which I can't remember at the moment)
Ported and polished Intake,,
CC 305 cam,
LT4 Extreme Timing set
FLP Long Tube Headers, Custom Y-pipe to stock Cat back (wiring in place for an electric cutout),
160 degree T-stat
Accel 300+ Ignition
LT4 Knock Module,
ODB1 PCM + LT1 Edit for custom tuning (Dyno tuned at ARE to over 350 Rear Wheel HP or an estimated 425 HP at the crank)
Under Drive Pulley,
SLP Billet Flywheel,
LT4 Clutch,
LS1 Aluminum Driveshaft,
T2R Rear diff, (read about it here: http://www.torsen.com/products/T-2R.htm
Corvette (C5) Front Brakes (using Bob Bishop's light weight aircraft quality aluminum brackets)
Adjustable height Ground Control Coilovers (550 # front / 150 # rear), Koni Single Adustable Front shocks and Bilstein Rear shocks
Prothane:Motor-Tranny&Torque Arm Mounts,
BMR:Strut Tower Brace
Adjusteable .Pan hard rod
Adj.Lower Control Arms
SLP bolt on SFC's,
Strano 35mm Front Sway Bar
Prothane bushings
No visible exterior modifications, looks completely stock from the outside
---------------------------------------
Extras Included with the Car:
Laptop and cable with LT1 edit (for reprogramming) and TTS Datamaster (data logging software (the laptop itself is old and has no value, its the software that has value)

Extras not included but negotiable:
Set of 4 original WS6 rims (the ones being sold with the car are 2000 WS6 rims)
Set of 4 18" back Corvette C5 Magnesium Wheels(They look like this: http://i300.photobucket.com/albums/n...n/100_1726.jpg )
Set 6 Corvette ZR1 replica rims, I have two sets of fronts (one set is 9 inches wide and one is 11 inches wide) and one set of rears that are 11 inches wide.
I also have some extra parts (Opti Spark, headlight motors, rear view mirror, etc. etc.)
--------------------------------------------------------

If you have read this for, this is how the add reads at AutoTrader, BUT as a special for RFD folks, I will include all of the Wheels and extra parts which were mentioned above as "Extras not included but negotiable" !!!!!
I am "giving this car away" at 10K so the price is very firm right now.
If the car does not sell in a couple of weeks I am going to start ebaying all the extra parts I have and will be more flexible on the price.

Pictures here:
http://sella.autotrader.ca/AdDetails...&frnID=5691024

[NorthernPaladin]

/\

[NorthernPaladin]

\/

[NorthernPaladin]

[NorthernPaladin]

[NorthernPaladin]

[NorthernPaladin]

[NorthernPaladin]

[NorthernPaladin]

[NorthernPaladin]