GTA Dash Camera Professional Install - $25 Any Camera, Any Car GROUP BUY

[oo7ibm]

UPDATE!!!

There is enough interest for this and the group buy has been authorized.

I have spoken with Mark at Lockdown and there will be someone there from the Lockdown Security at BOTH MARKHAM AND MISSISSAUGA BlackVue pickup locations to collect payments schedule the install appointments.

So you can pick up your camera (pm for pickup details), pay for the install, and schedule your appointment all in one shot.

A receipt WILL be provided for the pre-payment.

For those of you that were not able to get in to this group buy, the install rate will be honored for the next batch, however, pre payment will guarantee your install rate. Try to make it out to one of the Pickup Locations to make your Pre-Payment.

The Pick Up locations were provided in the email sent by Pintobean. If you are unsure, please PM me.

Finally, please be sure to bring EXACT CHANGE as requested by the company.

If you already have your camera, or are unable to make the group buy meets, please call them directly now to book your appointment. Be sure to mention Red Flag Deals and they will schedule your appointment. Payment will be taken on the day of installation.

Any questions can be directed to Mark directly at the pick up locations or by calling Lockdown Security at (647) 439-4485
__________________________________________________ __________________________________________________ _

Hey everyone,

So with all of the dash cam sales thriving in the group buy forums, there were a few posts going around for professional installation. I have contacted a company in regards to getting a group buy going for the professional installation of the cameras.

The company is Lockdown Security in Scarborough, Ontario. They sell and install pretty much anything to do with car electronics (alarms, remote starters, car audio, lighting, etc.) I have been dealing with this company for a few years now, and have had the best service at amazing prices. Since I know the owner, I spoke with him today to gauge interest in getting a group buy going for the dash cam install.

He is willing to do the install for $25 (normally about $50) inclusive of wiring and labour. This will include mounting of the camera, hard wiring the camera to the battery or the ignition (customer preference), and hiding the wires.

The owner can only accommodate this price if we have enough customers willing to participate in this group buy. That being said:

Please post on this forum if you are interested in taking advantage of this deal. I will keep track and make a list of all parties interested. Once we have enough interest, I will further post instructions on how to proceed with the install.

Any payments will be made directly to the company at the time of the install.

Please do not contact the company directly in regards to the group buy. The last thing I want is for them to get flooded with RFD'ers calling to inquire. As I stated, just post on here if you are interested, and once there are enough people interested, I will advise on the next steps.

If you have any specific questions in regards to any special requirements or requests for your vehicle, please pm me with the information, and I will find out and get back to you. Be sure to include your make, model, year, and details of the request.

The company information is listed below:

Lockdown Security
191 Nugget Ave Unit 3
Scarborough, Ontario
M1S 3B1
www.lockdownsecuritycanada.ca

Added: For anyone who ordered a Power Magic Box, there will be an additional $10 charge to the original $25 ($35 total) to have this installed. Please specify in your post if you need to have this installed instead of hard-wiring the camera.

PLEASE NOTE: this deal is valid for ANY type of Dash Cam. Brand does not matter, and neither does the make and model of the car. As long it is a standard camera that requires Power and Ground only, the install is universal and will be $25. Don't forget to mention in your post if you need multiple installs (eg. 2 separate vehicles)

[Hedges82]

Hey everyone,

So with all of the dash cam sales thriving in the group buy forums, there were a few posts going around for professional installation. I have contacted a company in regards to getting a group buy going for the professional installation of the cameras.

The company is Lockdown Security in Scarborough, Ontario. They sell and install pretty much anything to do with car electronics (alarms, remote starters, car audio, lighting, etc.) I have been dealing with this company for a few years now, and have had the best service at amazing prices. Since I know the owner, I spoke with him today to gauge interest in getting a group buy going for the dash cam install.

He is willing to do the install for $25 (normally about $50) inclusive of wiring and labour. This will include mounting of the camera, hard wiring the camera to the battery or the ignition (customer preference), and hiding the wires.

The owner can only accommodate this price if we have enough customers willing to participate in this group buy. That being said:

Please post on this forum if you are interested in taking advantage of this deal. I will keep track and make a list of all parties interested. Once we have enough interest, I will further post instructions on how to proceed with the install.

Any payments will be made directly to the company at the time of the install.

Please do not contact the company directly in regards to the group buy. The last thing I want is for them to get flooded with RFD'ers calling to inquire. As I stated, just post on here if you are interested, and once there are enough people interested, I will advise on the next steps.

If you have any specific questions in regards to any special requirements or requests for your vehicle, please pm me with the information, and I will find out and get back to you. Be sure to include your make, model, year, and details of the request.

The company information is listed below:

Lockdown Security
191 Nugget Ave Unit 3
Scarborough, Ontario
M1S 3B1
www.lockdownsecuritycanada.ca

PLEASE NOTE: this deal is valid for ANY type of Dash Cam. Brand does not matter, and neither does the make and model of the car. As long it is a standard camera that requires Power and Ground only, the install is universal and will be $25


I'm down if we get something going! He's just right around the corner from me on Nugget road. (I will be for me and my family so 5 of us)

[sasquatch]

Im interested as the price seems reasonable. Thanks for looking into this for us.

[Meowiejuie]

I'm down as well ( 1 Camera / 1 Car ) .. I would like to know if it would be fine to hardwire this cam to the car without the power magic pro.. Let say I drive the car everyday but leave it on while parked at work (8 hrs) and at night time (10 hr).. will that drain the battery to a point where it will not start the car, just like as if someone left the doom light on?

[magnum703]

So... the guy is mounting the camera, tries to hide the wires and plugging it into the cigar outlet for $25?

[Anu13is]

I might be interested.

[BluePhirePB]

Wow I called a place in Guelph earlier this morning in anticipation of dash cam installation and they quoted me at $75/hour for labour. Adding the twin 6" neons I wanna put in the foot well, they said it'd be about $150! I will want in on this if it's successful as a group buy! BTW, you think they could wire my neon lights as well for a little extra if not equal pricing?

[Meowiejuie]

So... the guy is mounting the camera, tries to hide the wires and plugging it into the cigar outlet for $25?

I think he is hardwiring it so some ppl can take advantage of the parking mode. Some cars (myself included) the cigar lighter has no power after the engine is shut off.

[vaportech]

I'm in for one install.

I hope your installer has extra wires to run from the dash to the trunk where my battery sits.

Gonna require splicing.


2011 BMW 335is.

Thanks.

[vaportech]

I'm down as well.. I would like to know if it would be fine to hardwire this cam to the car without the power magic pro.. Let say I drive the car everyday but leave it on while parked at work (8 hrs) and at night time (10 hr).. will that drain the battery to a point where it will not start the car, just like as if someone left the doom light on?

Should be fine, depends on how strong your battery is.

Yea it's the equivalent of leaving the dome light on.

[sasquatch]

I'm in for one install.

I hope your installer has extra wires to run from the dash to the trunk where my battery sits.

Gonna require splicing.


2011 BMW 335is.

Thanks.

Cant he just run it ot the fuse box inside the glove box?

[chickenbones]

Hiding the wires requires taking apart the a pillar. I doubt hes going to do this for 25 bucks.

[Hedges82]

I'm in for one install.

I hope your installer has extra wires to run from the dash to the trunk where my battery sits.

Gonna require splicing.


2011 BMW 335is.

Thanks.

lol That includes for me! All BMW's and 1 Merc

[magnum703]

One question. In Parking mode, does the camera have its own battery to record videos? Or does it have to be hardwired to the car battery to power the camera?

[Rengoku]

Hiding the wires requires taking apart the a pillar. I doubt hes going to do this for 25 bucks.

Depends on the car I guess. For mine (RSX) the a-pillar is held in place with a couple clips, the whole thing comes right off with a little pressure.

[CONTROL ONE]

Guys, this is way easier than it seems. I might make a DIY install guide for this if I have time.

The power source has 2 wires, power and ground.

1. If you want the camera to run 24/7 with no interruptions, splice into a 12v constant source in your fuse panel inside the vehicle (min 30a, pref 40a).

2. If you want the camera to turn on and off with your cars ignition (no parking mode this way but also no risk of wearing battery down), you need to splice into a 12v switchable source.

The ground wire will just be attached to the closest body bolt on the car.

Even with option #1, you still run very little risk of draining the battery since it has intelligent recording meaning it only turns on when it senses something or is physically moved. Even so, it does have an internal battery to assist with this.

The only chance I can see this would wear out the battery is if you lived on a busy street (constant vehicles coming by) and left your vehicle parked for 1 week+. Otherwise, you'll be fine.

[Hedges82]

We need a second group buy now for Power Magic Pro lol unless Lockdown security has something to accomodate for this?

[NO CARRIER]

I'm in for one install.

I hope your installer has extra wires to run from the dash to the trunk where my battery sits.

Gonna require splicing.


2011 BMW 335is.

Thanks.

Your 335is has battery terminals under the hood as well, including a positive terminal bolt, and nearby ground that are already there for installations such as this. There is a wiring harness passthrough behind your glovebox through the firewall to feed the wire. Alternately he can tap into your fusebox using a piggyback harness on one of your mini-fuses and up the amperage rating which would be even easier.

[oo7ibm]

Thanks for your interest everyone, I'm making a list to keep track.


So... the guy is mounting the camera, tries to hide the wires and plugging it into the cigar outlet for $25?

He is going to hardwire it to the battery or ignition (as stated in the original post).

And yes, this includes taking the pillar apart to hide the wires.

The only exception to this may be if the battery is in the trunk (more than half hour labour). I will call him shortly to find out how much that will be, but I don't anticipate it being too much more.

Keep em comin guys!


EDIT: as stated previously, there are power sources to tap in to at the front of the vehicle.

[oo7ibm]

We need a second group buy now for Power Magic Pro lol unless Lockdown security has something to accomodate for this?

The process is practically the same for the power magic pro, so I will confirm that with him.

Can someone please confirm if the PMP has power and ground, and just plugs in to the cig plug of the camera?

[oo7ibm]

Forgot to mention:

Please state how many cameras/vehicles you will are interested in having the install done with your post.

Thanks

[sasquatch]

The process is practically the same for the power magic pro, so I will confirm that with him.

Can someone please confirm if the PMP has power and ground, and just plugs in to the cig plug of the camera?

It has 1 extra wire. 1 for ground, 1 for constant source of power, and 1 for a power source that only on when the ignition is on.

[Meowiejuie]

The process is practically the same for the power magic pro, so I will confirm that with him.

Can someone please confirm if the PMP has power and ground, and just plugs in to the cig plug of the camera?

The power magic pro has 3 wires that goes into the fuse box. I think someone posted the instructions on the GB thread. It's actually quit easy.

[oo7ibm]

Wow I called a place in Guelph earlier this morning in anticipation of dash cam installation and they quoted me at $75/hour for labour. Adding the twin 6" neons I wanna put in the foot well, they said it'd be about $150! I will want in on this if it's successful as a group buy! BTW, you think they could wire my neon lights as well for a little extra if not equal pricing?

For neon lighting, it is best to contact them directly. Let them know you are part of the group buy being set up for the dash cam install, and would like a quote on any other service.

Same goes for anybody else interested in other services by this company.

[ben_liu]

In for two installation. One camera per car

[CONTROL ONE]

Please throw out the neons. Please.

[ToCardinal]

I'm in for one install.

[oo7ibm]

Okay folks,

I have confirmed the pricing with Lockdown for the Power Magic Pro Box. It will be an extra $10 to the original $25 to have the PMP installed.

This price MAY be lower depending on how many PMP's people actually ordered.

But as it stands:
$25 for the standard 2 wire camera only install
$35 for the 3 wire PMP install.

And to confirm, there will be NO extra labour for vehicles that have a battery in the rear.

I will be updating my original post to reflect this.

[magnum703]

Can someone please explain to me what the PMP is for? Is it an external battery source to power the camera?


Okay folks,

I have confirmed the pricing with Lockdown for the Power Magic Pro Box. It will be an extra $10 to the original $25 to have the PMP installed.

This price MAY be lower depending on how many PMP's people actually ordered.

But as it stands:
$25 for the standard 2 wire install
$35 for the 3 wire PMP install.

And to confirm, there will be NO extra labour for vehicles that have a battery in the rear.

I will be updating my original post to reflect this.

[oo7ibm]

Can someone please explain to me what the PMP is for? Is it an external battery source to power the camera?

No all it does is monitor your battery voltage if you leave your car off and the camera running for an extended period of time. If the voltage dips below a certain amount, or if a certain amount of time passes, it shuts the camera off to prevent it from draining the battery any further. If you use your car frequently (every 48 hours or less), I wouldn't recommend buying this. Its a waste of money.

[leungly]

One Car, One Install

[kennyluo]

i am interested, 1 car 1 install and probably power magic pro

[Hedges82]

So do we need PMP? I'm just worried it would drain too much power when the car is not running!

[oo7ibm]

So do we need PMP? I'm just worried it would drain too much power when the car is not running!

I don't believe this will use too much battery if it's hard wired in. Depending on the battery and age, it's safe to assume you can leave it on for 48 hours or more without it causing any drain issues.

[RubberCheese]

One question. In Parking mode, does the camera have its own battery to record videos? Or does it have to be hardwired to the car battery to power the camera?

There is a battery built into the camera, but it will only run for a few seconds so the video file can be closed properly. The camera only functions normally off your car's battery (or another external source).


I don't believe this will use too much battery if it's hard wired in. Depending on the battery and age, it's safe to assume you can leave it on for 48 hours or more without it causing any drain issues.

The camera uses 4W peak. Most auto batteries would support this for days (if not weeks) with no problem.

[BluePhirePB]

Please throw out the neons. Please.Haha it is quite ricer lol. I bought them when I was 16 when I thought ricing up cars was the ****. I'm 27 now and don't know what else to do with them.

[BluePhirePB]

Oh and one car, one install (no PMP).

What's the main point of PMP anyways?

EDIT: Install will be on a 2010 Toyota Matrix XR w/AWD.

[labqiwi]

Definetly interested. I'm in for sure. 1 car 09 civic coupe and 1 camera.

[m0cha]

The price sounds good, in for one install.

[oo7ibm]

The price sounds good, in for one install.

The list is coming along nicely, please keep the messages coming!

[joeyjoejoe]

I'm on the Blackvue waiting list for the camera, but on the list for the Power Magic Pro. I'm down for 1 car, 1 install+PMP, but it might take a while if the waiting list doesn't get any cams.

[dragontea]

Down for 2

[CH40Z_008]

I'm in for Mazda 3 2010 install of Blackvue, don't know yet if I could get the PMP.

[blexann]

does the $25 install inclue the hiding of the wires?

[oo7ibm]

does the $25 install inclue the hiding of the wires?

Yes the wire concealment is included in the cost of the install.

[bladerunner]

lol That includes for me! All BMW's and 1 Merc

I'm going to use a fuse tap into the glove dept, it should easy to run the wire underneath the roof liner.

[nevetS4]

I am interested. 2 cars 2 installation

[pintobean]

oo7ibm, can you ask your guy how easy it would be to reverse the installation and remove the camera and wire at some later date. I am installing my cam into a company car, so at some point, I would need to remove the cam and return the car when my current lease expires.

Thanks!

[kinoptik]

I am in :razz:

[HBP]

Why do so many of you want the camera running while your car is parked?

All I can see it doing is MAYBE protecting against a hit and run/vandalism. But unlikely you'll ever get a license plate/face that you can track down...

[m0cha]

Why do so many of you want the camera running while your car is parked?

All I can see it doing is MAYBE protecting against a hit and run/vandalism. But unlikely you'll ever get a license plate/face that you can track down...

A good quality 1080p dash cam should have no problem getting a license plate/face as evidence, it's definitely better than nothing.

[zyphere]

Is there a specified time limit to when you'd have to get the installation done by?

I may get one or two. Potentially one for my current car, but I don't care much about that. I'd want one for a couple months down the road (like late summer) when I get a new car -- then I'd want the wire tucked away looking neat.

[oo7ibm]

oo7ibm, can you ask your guy how easy it would be to reverse the installation and remove the camera and wire at some later date. I am installing my cam into a company car, so at some point, I would need to remove the cam and return the car when my current lease expires.

Thanks!

Hey Pinto,

The install will be fully reversible with no permanent changes to the vehicle. There is no drilling and the process can be fully reversed.

Can I put you down for one? Id like to pay for yours if that's okay?

[oo7ibm]

Is there a specified time limit to when you'd have to get the installation done by?

I may get one or two. Potentially one for my current car, but I don't care much about that. I'd want one for a couple months down the road (like late summer) when I get a new car -- then I'd want the wire tucked away looking neat.

There is no set in stone time limit but I would say it won't extend past roughly 3 months after the installs start. So try and get the installs done as soon as the cameras come in. As for late summer, it is unlikely this will be honored so far down the road but i'm sure it will still be a reasonable price.

[oo7ibm]

To everyone, I have updated the list, but we need more people! Please pm me or reply here if you are interested. With 250 cameras coming in, I am sure more than 50 people need an install!

[pintobean]

Hey Pinto,

The install will be fully reversible with no permanent changes to the vehicle. There is no drilling and the process can be fully reversed.

Can I put you down for one? Id like to pay for yours if that's okay?
Hey thanks for looking into that for me.
You can put me down for 2 installs.
One on my company car - 2011 Honda Accord.
One on my personal car - 2010 Hyundai Santa Fe.
Thanks also for your offer to pay for one install. That's very generous of you :)

[oo7ibm]

Hey thanks for looking into that for me.
You can put me down for 2 installs.
One on my company car - 2011 Honda Accord.
One on my personal car - 2010 Hyundai Santa Fe.
Thanks also for your offer to pay for one install. That's very generous of you :)

Done and Done.

And don't mention it! Your hard work will not go unnoticed!

[ToCardinal]

To everyone, I have updated the list, but we need more people! Please pm me or reply here if you are interested. With 250 cameras coming in, I am sure more than 50 people need an install!

Maybe you can ask Pintobean to link this thread to his post on the first page cause sometimes people may not notice your thread, just saying.

[Broli's Mom]

If there is a list with a PMP, please add me for one vehicle.

[pintobean]

Maybe you can ask Pintobean to link this thread to his post on the first page cause sometimes people may not notice your thread, just saying.
Good idea!
Done!

[DubKrazy]

I am waitinjg to get in on pintobean's second batch coming in in a month. Also, my car is in storage right now and will be out by the end of April/first week of May. I am in for one install if its not going to be a problem for me to come in then.

[middlemanjoe]

Add me for 1 install with PMP

[mok86]

Add me for 1 install with PMP

[ultran00b]

Add me for one install without PMP.

[Magbee]

i'm interested - 1 camera. thanks!

[jjc]

Add me for 1 install with PMP

[oo7ibm]

list is up to date. The camera's will be here soon folks lets get your names in ASAP!

[ryosayku]

In.

[hikthxybye]

Down for 1 Blackvue install on 1 car. Thanks!

[toalbe]

1 definitely, might be 2

[jonjon72]

Down for two with Blackvue.

Jon
Eric

[Ruffz]

I am waitinjg to get in on pintobean's second batch coming in in a month. Also, my car is in storage right now and will be out by the end of April/first week of May. I am in for one install if its not going to be a problem for me to come in then.

Also waiting to get in on the second batch. Will be in for one install if possible. Thanks

[BluePhirePB]

So are we all waiting until we get our cams to book install as a group or are we just calling them up, letting them know we're part of this group install and then booking iindividually?

[belfour]

Are most ppl going to wire to the car battery or the ignition.. wonder which one is better.

[deesaur]

down for 3 installs

[BluePhirePB]

Are most ppl going to wire to the car battery or the ignition.. wonder which one is better.If you're going for parking monitoring, wire to battery (most who are using that feature are also wiring PMP). If you're just recording on road, then ignition is fine.

[Tijuana]

I'm in, when can we get them installed?

[oo7ibm]

hey folks sorry for my lack of presence been super busy with work. I will be on later tonight with updates and answers to questions!

[oo7ibm]

UPDATE!!!

There is enough interest for this and the group buy has been authorized.

I have spoken with Mark at Lockdown and there will be someone there from the Lockdown Security at BOTH MARKHAM AND MISSISSAUGA BlackVue pickup locations to collect payments schedule the install appointments.

So you can pick up your camera (pm for pickup details), pay for the install, and schedule your appointment all in one shot.

A receipt WILL be provided for the pre-payment.

For those of you that were not able to get in to this group buy, the install rate will be honored for the next batch, however, pre payment will guarantee your install rate. Try to make it out to one of the Pickup Locations to make your Pre-Payment.

The Pick Up locations were provided in the email sent by Pintobean. If you are unsure, please PM me.

Finallu, please be sure to bring EXACT CHANGE as requested by the company.

Any questions can be directed to Mark directly at the pick up locations or by calling Lockdown Security at (647) 439-4485

[kennyluo]

UPDATE!!!

There is enough interest for this and the group buy has been authorized.

I have spoken with Mark at Lockdown and there will be someone there from the Lockdown Security at BOTH MARKHAM AND MISSISSAUGA BlackVue pickup locations to collect payments schedule the install appointments.

So you can pick up your camera (pm for pickup details), pay for the install, and schedule your appointment all in one shot.

A receipt WILL be provided for the pre-payment.

For those of you that were not able to get in to this group buy, the install rate will be honored for the next batch, however, pre payment will guarantee your install rate. Try to make it out to one of the Pickup Locations to make your Pre-Payment.

The Pick Up locations were provided in the email sent by Pintobean. If you are unsure, please PM me.

Finallu, please be sure to bring EXACT CHANGE as requested by the company.

Any questions can be directed to Mark directly at the pick up locations or by calling Lockdown Security at (647) 439-4485

Thanks.

How about the people who will pick up in downtown or already picked up? How are they going to pay for the installation? Is there any other way to do it beside the Markham and Mississauga pickup location?

[oo7ibm]

Thanks.

How about the people who will pick up in downtown or already picked up? How are they going to pay for the installation? Is there any other way to do it beside the Markham and Mississauga pickup location?

Knew I forgot something!

If you already have your camera, please call them directly now to book your appointment. Be sure to mention Red Flag Deals and they will schedule your appointment. Payment will be taken on the day of installation.

The phone number is (647) 439 4485

[flafson]

Are they mounting it in such a way that i can just take it off myself and return the leased car? I wouldn't care about leaving whatever wires they have running inside the car.

[oo7ibm]

Are they mounting it in such a way that i can just take it off myself and return the leased car? I wouldn't care about leaving whatever wires they have running inside the car.

The install is fully reversible for leased vehicles, there should be no permanent changes made during the install.

The camera itself is mounted using the double sided tape tabs that come with the camera, and that is removable when it's time to return the vehicle.

[oo7ibm]

A reminder for Monday's pick up for the Blackvue Mississauga group that Mark from Lockdown will once again be attending to book reservations for the install. There was HUGE interest for this at the first meet, lets keep this going!

Cheers,

oo7ibm

[bladerunner]

Did anyone get the install done yet? Just wondering if they use a fuse tap or do they tap into a wire.

[squall458]

I have my own dash and want in on the GB. Do I just call and say im from the RFD group buy install?

[kennyluo]

I have my own dash and want in on the GB. Do I just call and say im from the RFD group buy install?

thats what i did... i called and mentioned RFD group buy install, then book an appointment

[pintobean]

Did anyone get the install done yet? Just wondering if they use a fuse tap or do they tap into a wire.
Somebody at today's meet in Mississauga asked that exact question... Mark said they can do either method, but prefer the wire-tap over the fuse-tap. I presume this is because a wire-tap is easier and probably less time-consuming to do.

I asked Mark if going with the wire-tap method would cause me issues when it was time to return my leased company car, and he said they would simply undo the connection and cover the spliced area with electrical tape. He mentioned that the wiring on most cars is covered in rolls of electrical tape anyways, so it was unlikely that anyone would be able to spot where the connection had been, let alone raise any concerns about the splicing job.

Mark also said that they would cut into the unit's cigarette adaptor plug when installing the cam, so if you had an issue with that, then it would be wise to go purchase another cigarette adaptor plug from any hobby store.

[Kouyo]

Got my blackvue installed today. I saw wires getting spliced and tape up. They hid all the wiring really well and mounted the camera behind the rearview mirror for me. Really good service, I just drove there and gave them my keys with the receipt and it was done before I knew it.

[yao416]

Pics pics pics

[Kouyo]

Pics pics pics

lol I will take some tomorrow morning its dark now

[yao416]

Thanks. Take some pics of how they hid the wire

[Kouyo]

work network don't like imageshack lol

PM me your email and I'll send some pics.. you basically just see one wire coming out behind the rearview mirror

[magnum703]

Whaa.. the... Installing this camera was so easy. Why are you guys paying people to do it? lol

[yao416]

Whaa.. the... Installing this camera was so easy. Why are you guys paying people to do it? lol

It took me 45 mins to neatly tucked into the pillars. I used cig socket though. Most people are probably wiring it to the fuse or something. That's why.

[Kouyo]

Here are the pics..

My view
http://img10.imageshack.us/img10/3012/img0279nk.jpg

Looking from left side
http://img849.imageshack.us/img849/6243/img0280pf.jpg

Centre view
http://img515.imageshack.us/img515/6363/img0281c.jpg

Under
http://img36.imageshack.us/img36/6637/img0282nm.jpg

Outside (a bit obvious when people look in, plus the light would be in park mode.. gotta change that setting soon lol)
http://img513.imageshack.us/img513/7919/img0283bs.jpg

[Kouyo]

Whaa.. the... Installing this camera was so easy. Why are you guys paying people to do it? lol

Yeah I thought the same but with pinto giving back $14 it was just another $11 more to get it installed so I thought why not :D

And another big thanks to Pinto since I'm posting, thanks!! :razz:

[turtle-r]

Just got mine installed, very satisfied with the outcome.

[labqiwi]

I just gave pinto my $14

[ToCardinal]

I just gave pinto my $14

+1

[bladerunner]

I just gave pinto my $14

+2

[CH40Z_008]

+2
+3

[BluePhirePB]

I'm gonna book an install for this Saturday. Is it $25 + tax or just $25 cash?

[ToCardinal]

^^just mention you're part of rfd blackvue group buy when making your appointment, then it'll just be $25 cash, everything included.

[BluePhirePB]

Boo, just called. They're all booked for this Saturday. Guess I'll have to wait until next time I'm down near Scarborough.

[bladerunner]

I'm getting mine installed today, plan on doing the fuse tap so it's easier to remove.

[BluePhirePB]

Is everyone that was involved in pintobean's GB going to Lockdown? I'm not sure where I copied this from but there was a post about John from Autolinks also doing the install for $25. Anyone have any info on this?

[ToCardinal]

Is everyone that was involved in pintobean's GB going to Lockdown? I'm not sure where I copied this from but there was a post about John from Autolinks also doing the install for $25. Anyone have any info on this?

Some of us went to lockdown but I believe you're looking for this link (http://forums.redflagdeals.com/auto-links-blackvue-professional-installation-book-your-appt-now-25-00-a-1153831/) from autolinks?

[BluePhirePB]

Might have to go to them instead since Lockdown is totally booked for Saturday and that's the only day I'm available in the foreseeable future.

EDIT: Thanks ToCard! Got it booked for 3pm this Saturday!

[kennyluo]

Went to Lockdown today, and found out the PMP is defected. Lockdown offered me to come back and finish the installation free of charge, nice people.

[blexann]

Is there a concensus as to the best way to connect the cam to the windshield ? tape/sticky/velcor ...etc?

[BluePhirePB]

I still think the provided sticky is best.

On a different note, does anyone know if it's easy to change the way the dash cam is wired to the car? Reason I ask is because I got my cam wired at Autolinks ($25 + tax in about 45 minutes) and I didn't specify enough about how I wanted it wired. I said I wanted it wired to the ignition but what I really meant was to the ON position so when I crank the key one notch, it turns on with the clock and radio rather than full ACC on. It was completely my mistake for not being specific and Autolinks did a fabulous job. John was really nice and his team do wonderful work.

Anyways, is it easy to change or should I just wait until I get my second cam and mention it to them while they wire my rear cam?

[pintobean]

...I said I wanted it wired to the ignition but what I really meant was to the ON position so when I crank the key one notch, it turns on with the clock and radio rather than full ACC on...
I'm confused as to why you want your cam wired that :arrowu: way.

The way I see it, there should really only be two options when hard-wiring the cam: you have it connected to a wire or fuse that receives constant power, even when the car is not running (dome light, power locks), or you have it connected to a wire or fuse that only receives power when the car is running (power windows, headlights).

It seems that your current setup is the second option listed above in that the cam only receives power when the car is running. You are contemplating switching things so that the cam receives power when the key is turned one notch, and the car is simply using battery power (neither running nor "off").

Why do you want that? Do you often sit in your car with the clock and radio on, but the engine not running? Where do you do this and why do you want it to be recorded?

[BluePhirePB]

Why do you want that? Do you often sit in your car with the clock and radio on, but the engine not running? Where do you do this and why do you want it to be recorded?The unit takes around 40 seconds to boot up so I'd rather have just radio/clock/cam powered up instead of having everything powered up or car idling for 40 seconds. More importantly however is say I'm a witness to an accident OR I'm involved in a collision (scam or not) and I get out of my car for a period of time, I want to the camera to be continually rolling without having my car running after the incident happens.

[pintobean]

:arrowu:
In that case, I think you should have had the cam hardwired to a constant power source. That would eliminate the 40 second start up time, because the cam would always be running. You would just need to unplug your cam if you didn't want it to be recording. And in the case of an incident or accident, the constant power would allow you to leave the car and take your keys with you and know that the cam was still recording, as opposed to your current setup where you have to leave your keys in the car's ignition to ensure continuous recording.

I should point out that at least one user has reported a slightly faster startup time after upgrading to the latest firmware, so you may want to consider that... I think a faster microSD card might be beneficial as well. I haven't tried either of these methods (yet), but I will report back if I notice any changes after upgrading firmware and trying my class 10 card.

[BluePhirePB]

Thanks Rene! I'll give the firmware upgrade a shot later tonight. I don't want the direct battery wiring since I don't need it to record continuously. I just like being able to activate the camera separately from having to start the car. If I still find it bothersome after a few weeks, I'll probably get them to rewire it the same way the cigarette lighter is wired along with the second/rear cam I plan on getting.

[zzz3]

confirmed with mark that this is still valid (asked him about itronics itb-100hd install):

We can do $25 cash for basic camera installs and the power box I believe is like the PMP (Power Magic Pro) for the BlackVue, which is an additional $10 cash

[joeyjoejoe]

confirmed with mark that this is still valid (asked him about itronics itb-100hd install):

I would be down for this...


Just curious, how hard is it to uninstall the camera + power cord?

I want to install the itb-100hd + uninterrupted power cable in my car, but then later use a different cam and possibly a different power cord.

[zzz3]

Can we have the OP set up another group buy deal as i would be interested in the dash camera professional install for my basic model Carcam P5000
pls & thanks

anyone can participate in it. give mark a call and tell them you are from redflagdeals or torontomazda3 and mention the dash cam group buy install thread.


I would be down for this...

Just curious, how hard is it to uninstall the camera + power cord?

I want to install the itb-100hd + uninterrupted power cable in my car, but then later use a different cam and possibly a different power cord.

i don't imagine its very hard as all you would need to do is get a spare cable (or use the existing cigarette cable) and splice power into map light etc. the only reason i would pay the $25+$10 for power box installation is because i don't feel like taking apart my dash and head liner.

[Shinjieva01]

getting my itronics installed at lockdown security on Saturday. a little worried about the idea the interior of my car being taken apart and wires being rearranged...is there anything I should be aware of (or need to clarify with them) before I hand over my keys?

[zzz3]

getting my itronics installed at lockdown security on Saturday. a little worried about the idea the interior of my car being taken apart and wires being rearranged...is there anything I should be aware of (or need to clarify with them) before I hand over my keys?

i'll be there saturday morning as well (missed my appointment last night due to traffic). i think its just like getting tints done, go for an extended test drive after on some rough roads to sort out any loose panels/trim.

[joeyjoejoe]

I like Lockdown's service. They were fast, professional and did a good job. Bonus points for turning away a customer who came in before me who did not book an appointment. It wasn't to install a dash cam, but to do some other work. They could have easily made me wait, but didn't.

I'll use them again to install the Itronics... whenever that comes in.

[belfour]

They did my car last time for the dash cam, everything was good. Going back again on Wednesday for another install.

[Shinjieva01]

just got mine installed! took only 30 minutes .. but waited almost an hour total because they were so swamped lol.

[wilson881]

just got my itronics this week, is the $25 install still on?

[zzz3]

just got my itronics this week, is the $25 install still on?

Yes.

[chrisuoft]

Is this still on? I'm ordering a Livue LB100 and would like it hard wired to my Audi A5.

Also, are they installing the hard wire through the fuse box? Or is it rigged up to the battery somehow? Sorry if this is a stupid question!

[zzz3]

yes. and yes to fusebox.

$10 extra if you have a parking power module for preventing battery discharge:
http://dashcamtalk.com/battery-discharge-prevention/

[chrisuoft]

Thanks zzz3, I believe this unit has a built -in discharge prevention device.

http://dashcamtalk.com/livue-lb100/

[joeyjoejoe]

Are they still doing this? By this weekend I'll get my hands on a LUKAS LK-7900 Ace... and a Power Magic Pro Plus (The plus version supplies power to 2 cams). So LUKAS in the front and ITRONICS in the back.

This is probably a little more difficult of an install, so I'm sure it'll cost a little more to install.

[deal_with_singh]

Just out of curiousity, are dash cams any more complicated than say hooking up a Garmin/Tomtom GPS unit?

I've never got one, but really thinking about one with all the scams I'm hearing of lately.

[joeyjoejoe]

Are they still doing this? By this weekend I'll get my hands on a LUKAS LK-7900 Ace... and a Power Magic Pro Plus (The plus version supplies power to 2 cams). So LUKAS in the front and ITRONICS in the back.

This is probably a little more difficult of an install, so I'm sure it'll cost a little more to install.

Even with a full description, pictures and even links to where to buy it from... my cousin in Korea screwed up getting the wrong cam and the wrong power cord! I couldn't have made this more idiot-proof.... oh well. If the deal is stil on, then I'll book to install the wrong cam and the wrong power cord to my parents' car.

[casperr]

I wish we have a shop like this in Edmonton

[Shawns13]

Anyone know of a place in Montreal as experienced as these guys to install my cam?

Thanks!