Method to use Rig components out of the case

[djemzine]

Hi guys,

I am planning on basically taking my current rig components out of my case as I'll be doing few things such as full cleaning of the case, and will be selling my mobo, old GPU, CPU, RAM and old HDD to some fellow RFDers. Hence it will be easy to give/sell the product right away after testing.

So I was wondering where is the best place or surface to keep my motherboard on until I start my new build. Of course I'll do the same for the new build to do a "bench test" i.e. to ensure everything works fine before I put it in the case.

Should I use cardboard, piece of wood or how about my computer table? Any other alternatives? I don't have access to pieces of wood. Does cardboard cause static or? I don't have the motherboard box unfortunately so that's a no go.

[xalex0]

For storage use an antistatic bag. As for the bench test, my suggestion: don't. It doesn't take that much time/effort to put everything in the case.

[djemzine]

For storage use an antistatic bag. As for the bench test, my suggestion: don't.

Hmm. The thing is I will be using the "rig" outside the case as well on a regular basis until I sell the parts off and start the new build.

When you refer to the bench test, are you referring to not using an anti static bag?

[xalex0]

Hmm. The thing is I will be using the "rig" outside the case as well on a regular basis until I sell the parts off and start the new build.Well, you shouldn't. Especially, not with an empty case just standing there. Moreover, It's generally a good idea to hold off selling your old components before making sure that the new computer is fully working.




When you refer to the bench test, are you referring to not using an anti static bag?
I'm referring to powering it on outside the case.

[djemzine]

Well, you shouldn't. Especially, not with an empty case just standing there. Moreover, It's generally a good idea to hold off selling your old components before making sure that the new computer is fully working.



Gotcha. Well one of the buyers is in a rush and wants to buy the motherboard quickly but the other buying the RAM, CPU, etc is not in a rush. That's the thing ugh, however you do have a point good sir.


I'm referring to powering it on outside the case.



Right. Reason being it can get fried, or get dust, etc. Correct?

[xalex0]

Reason being it can get fried, or get dust, etc. Correct?
Pretty much. Additionally, it prevents proper airflow and increases clutter which creates inconvenience and may cause not only electrical damage, but even mechanical as well.

[djemzine]

Pretty much. Additionally, it prevents proper airflow and increases clutter which creates inconvenience and may cause not only electrical damage, but even mechanical as well.

Hmm so basically, take out the parts including mobo and keep it on a ESD back when cleaning and a) put everything back together so the buyers can test it out, etc. Or b) keep it out temporary out for storage but only turn it on when the buyers come and test it/look at it?

[xalex0]

Since you are planning to use it on a regular basis, it's advisable to put everything back together until you actually sell the components. Assuming that the motherboard will be sold first and very soon, I'm not sure if there is much room for testing, though.

[Ironsmack]

Ive put my mobo on the packaging box a few times to bench test the parts before putting inside the case. I left the mobo for a few days while i test/check all the components out.

But i always discharge myself before i touch the mobo.

[thinfilms]

I have my system fully exposed / scattered across my table for about 6 months now. Its fine as long as you know what you're doing.

The box your mobo came in should be a sufficient surface to put your system on. You can also use a sheet of plexiglass if you happen to have one (Obviously don't poke or touch anything when the system is on).

[flyz]

I have my system fully exposed / scattered across my table for about 6 months now. Its fine as long as you know what you're doing.

The box your mobo came in should be a sufficient surface to put your system on. You can also use a sheet of plexiglass if you happen to have one (Obviously don't poke or touch anything when the system is on).

This. Just put your components on any non conductive surface.

[xalex0]

Just put your components on any non conductive surface.Like carpet?

[djemzine]

Like carpet?

Lol. Carpet is conductive/creates static. I always put my case on a big piece of dry wood before I go in and do any work, etc.

[Amourek]

Use a cardboard box. I usually use the one that came with the motherboard.

[balance]

just put your rig in a place out of reach from others on box/wood is good, you might need supports to hold the PCI cards

[xalex0]

Lol. Carpet is conductiveIt's not, and that's exactly why it can accumulate static charge.


creates staticPrecisely. Hence, not any non-conducting surface will do.