ITalkBB and Teksavvy Cable

[pace]

When I put the VOIP box behind router, people have to call 2-3 times before being able to reach me. When it's put in front of the router, my dl speeds are capped at 8mb/s.

How can I fix this?

Thanks!

[balance]

my italk bb is behind my router

give it first priority, the only problem I encounter was that one of the phone jack on the italk bb cant do incoming or outgoing I forgot which one

VOIP is meh Calling is delay =( but its cheaper than bell or rogers

[rageking]

Always put the voip box behind the router. They tell you to put it in front of the router to minimize tech problems which costs everyone time and money.

I find if you properly program your QOS for all possible traffic, then the voip needs not be remotely near high priority for it to work. I also find ITalkBB doesnt use much bandwidth.

[chinese zzz]

Not sure about this .. I found this ITalkBB disconnect once month a least ... :|

This is on DSL and Dlink... my internet never disconnect once at three months ... :-0

[pace]

Thanks for the replies guys! now what exactly should I change in my router config? I have some crappy WBR 1310 d-link i believe... i'm open to buying a new router to fix this problem as well.

[chinese zzz]

Thanks for the replies guys! now what exactly should I change in my router config? I have some crappy WBR 1310 d-link i believe... i'm open to buying a new router to fix this problem as well.

The WBR 1310 d-link is crappy...? :?:

I have the D-Link DSL-2640B all in one modern and router together....:|

[geokilla]

I use iTalkBB as well and the best way to use it is to run it behind the router. Go to your router's page and then DMZ iTalkBB's IP address. There's a way to check the IP address on the Linksys unit that iTalkBB gives you. Google it as I don't remember how right now.

Note I'm running a Buffalo WHR-HP-G54 with DD-WRT.

[pace]

thanks! i DMZ'd SipuraSPA (the VOIP box thing)... will test it tomorrow. it seems to have 2 internal IP addresses though.... .100 and .101