LF: capacitor for my x800gto2 model: 2R5SVPC1500M

[idunno1987]

hey there ib roke a cap off my gto 2 :( ...anyways i found out the model of the cap
2R5SVPC1500M its made by sanyo
here is what it looks like and the markings from top to bottom are (looks like it is a 1500uf, 2.5 volt cap)
if anyone has a dead x800 and wants to lose a few caps :) lemme know thanks

http://img367.imageshack.us/img367/9649/10013632pw.th.jpg (http://img367.imageshack.us/my.php?image=10013632pw.jpg)

509
svpc
1500
2.5

[Adrian Lankosz]

Try digikey.ca , or mouser.com US shipping will cost abit though.

Need to have same value and size to rework. Manufacturer can be someone else.

Rework shouldnt be hard to do. If the pads are still there though, if they are ripped off aswell thats abit more work.

[idunno1987]

yeah they dont seem to have any so anyone with a dead x800 series with this cap ...lemme know :)

[Adrian Lankosz]

Just wondering whats wrong with the cap that you ripped off couldnt you solder it back on.

[idunno1987]

broke a lead :(

[Drthorne]

I have a dead X800XT, but there's no capacitor with that rating on mine

[cliff]

you can always use a cap with a higher voltage rating. Make sure the capacitence and type (electrolytic, ceramic, etc) is the same though.

[idunno1987]

pm sent to drthorne.....wouldnt putting a cap with a higher volatge ruin the card??...lol thanks

[[H]ackerK]

pm sent to drthorne.....wouldnt putting a cap with a higher volatge ruin the card??...lol thanks

NO!

The higher voltage rating on the cap is just a rating... but never go lower, cuz it will blow up the cap.

[simon0t7]

if you live in toronto, might want to check out supremtronics or whatever that store is called beside Active surprise, if not; i'd be interested in taking the card :)

[idunno1987]

unfortunately i dont live in to :( would you be able to check it out for me :( ....i dont think you would wnat the card...i paid 372$ total to have it shipped from the u.s. ...it is 16 pipe modded....it would clock 520/540 on stock cooling..and well i just installed my watercooling and this happened :( ..so do you think you could check it out for me??..thanks

mike

[idunno1987]

bump

[Coolme]

Have you tried radio shack? or The source? I am not sure if they have it, but they are the only ones that I know that carries electronics like 555 timers. BTW, you don't need to exact cap, just get one with the same rating.

[Spare-Flair]

unfortunately i dont live in to :( would you be able to check it out for me :( ....i dont think you would wnat the card...i paid 372$ total to have it shipped from the u.s. ...it is 16 pipe modded....it would clock 520/540 on stock cooling..and well i just installed my watercooling and this happened :( ..so do you think you could check it out for me??..thanks

mike

Where do you live? Most cities have real electronics stores in them. Responding to the previous poster, there are electronic supply stores in Calgary NE.

Just get a capacitor of the same type, but higher voltage rating. Same thing happened to me a few years ago with a Ti4200. Got a bigger cap with long leads and soldered it at an angle away from the card.

[idunno1987]

ill try lookin around here i live in a small town though.......

[idunno1987]

bump

[cliff]

You can order online from the: digikey catalogue (http://dkc1.digikey.com/CA/PDF/C061/P1.html)

[simon0t7]

damn, i was just down there today looking for stuff

i'll go again this week or early next and check for you

[injanear]

Like others have side try Digikey, active(active-tech.ca), rpelectroincs, and your local electronic part store. Even if the local people dont have them they might be able to point you to the right direction. Might also want to look on ebay.

[Q-Ball]

Did you already RMA this card? if so, should edit your first post :)

also, a store in my city, London, a amazing store @ http://www.counterparts.ca/

[BEpsilon]

Either RMA or try Digikey.

That is a surface-mount (OS-CON?) capacitor, almost all electronic component stores DO NOT stock them.