PlayerOne
Mar 10th, 2006, 11:36 PM
AHHHHHHHHHHHHH!!!! I"M GONNA CRY!!!!!
i'll try to keep the story short
my 2 year old asus m6n, came with ddr266 200 pin 256mb ram, i found it slow, it has a centrino1.4, i asked for advice on rfd, someone sent me manual for my laptop, i (not a newb nor an expert with comps) took my laptop apart, well, all i did was flipped open my keyboard, this laptop has 2 ram slots, one under the keyboard, one on the botoom side of the laptop, my original ram was in the slot on the bottom side of the laptop. I took it out to look at it, to see what ram it is so i can buy a new one
i bought a kingston KVR333, at the comp store, i took out my original ram replaced it with new one, it worked fine
I brought it home, took out the new ram, put the old one back in, then put the old one in the slot under the keyboard, turned on my laptop, and this is what i get:
push power button
light goes on for 5 seconds
laptop turns off as if i did a hard turn off (as if i held the button for a few seconds)
5 sec later, laptop lights turns on by itself, but no screen, no nothing, i tried waiting for a long time, nothing, just the power light is on, which forces me to hold hte power button to turn off comp
I tried putting in different combination of the 2 rams in the 2 slots, the same happens, i got lucky once, and i went in to my comp's specs and the ram was fine, so i thought all was good, but nope, it was just that one time, i then tried to put my original ram back in the original slot and took out my new ram (so back to what my laptop was like a few days ago)
guess what, i get that stupid thing again (the little routine i described above)
HELP ME
WHAT SHOULD I DO
I"M GONNA CRY (no i'm not but that's what people say)
i'll try to keep the story short
my 2 year old asus m6n, came with ddr266 200 pin 256mb ram, i found it slow, it has a centrino1.4, i asked for advice on rfd, someone sent me manual for my laptop, i (not a newb nor an expert with comps) took my laptop apart, well, all i did was flipped open my keyboard, this laptop has 2 ram slots, one under the keyboard, one on the botoom side of the laptop, my original ram was in the slot on the bottom side of the laptop. I took it out to look at it, to see what ram it is so i can buy a new one
i bought a kingston KVR333, at the comp store, i took out my original ram replaced it with new one, it worked fine
I brought it home, took out the new ram, put the old one back in, then put the old one in the slot under the keyboard, turned on my laptop, and this is what i get:
push power button
light goes on for 5 seconds
laptop turns off as if i did a hard turn off (as if i held the button for a few seconds)
5 sec later, laptop lights turns on by itself, but no screen, no nothing, i tried waiting for a long time, nothing, just the power light is on, which forces me to hold hte power button to turn off comp
I tried putting in different combination of the 2 rams in the 2 slots, the same happens, i got lucky once, and i went in to my comp's specs and the ram was fine, so i thought all was good, but nope, it was just that one time, i then tried to put my original ram back in the original slot and took out my new ram (so back to what my laptop was like a few days ago)
guess what, i get that stupid thing again (the little routine i described above)
HELP ME
WHAT SHOULD I DO
I"M GONNA CRY (no i'm not but that's what people say)