Whelan_999
May 31st, 2006, 05:38 PM
Hey
I have a pair of Rossignol skis for sale with Rossignol bindings. The skis are 160cm long and the bindings fit a size 10-11 boot (they can adjust) Skis were used for two years and have signs of wear on the topsheets and 3 scratches on the bottom that can be filled in with a tuneup at your local shop. The edges might need to be sharpened depending on how you like them. Here are some pics:
http://img248.imageshack.us/img248/5923/picture0865gb.jpg
http://img289.imageshack.us/img289/416/picture0872fp.jpg
http://img289.imageshack.us/img289/1875/picture0880pj.jpg
http://img289.imageshack.us/img289/5547/picture0896if.jpg
These next two pictures are of the scratches on the bottom, the long one is a core shot. The others were repaired but knocked out (along with my front tooth) last winter.
http://img289.imageshack.us/img289/3369/picture0907bb.jpg
http://img289.imageshack.us/img289/6479/picture0912aj.jpg
The next item up for bid is a World Industries Complete Skateboard. It has some ware on it. The under side has scratches on the nose and tail while the middle is pretty unscratched (there were two grind guards on it). The trucks are Fury trucks with Fury bushings and are in good condition. They have been grinded on as well, but not much (I wasn't that good at skateboard and it wasn't used that much). It has Silverado hardware and black speed deamon bearings (I think thats the name). There is one small chip in the nose of the board as well. And I'll toss in a pack of Destructo Abec-5 bearings. And I'm not sure what kind of wheels are on it. You can see all of this in the pictures below:
http://img529.imageshack.us/img529/1401/picture5zq.jpg
(package bearings are in is Pig but bearings are Destructo)
http://img242.imageshack.us/my.php?image=picture0862gy.jpg
http://img72.imageshack.us/my.php?image=picture0876po.jpg
http://img242.imageshack.us/img242/9316/picture0880kd.jpg
I live in Newfoundland so I'll do $100 with bindings and half and half on shipping. For the skateboard setup I'll sell that for $70 and again half and half on shipping. I will consider any trades you have, something electronic is always good and will intrest me.
If you have any questions you can email me at whelan_999@yahoo.ca or pm me here (post before hand). If you need any pictures of something don't hesitate to ask. I have one heatware entry which is in my signature below. Thanks for looking.
-aaron
I have a pair of Rossignol skis for sale with Rossignol bindings. The skis are 160cm long and the bindings fit a size 10-11 boot (they can adjust) Skis were used for two years and have signs of wear on the topsheets and 3 scratches on the bottom that can be filled in with a tuneup at your local shop. The edges might need to be sharpened depending on how you like them. Here are some pics:
http://img248.imageshack.us/img248/5923/picture0865gb.jpg
http://img289.imageshack.us/img289/416/picture0872fp.jpg
http://img289.imageshack.us/img289/1875/picture0880pj.jpg
http://img289.imageshack.us/img289/5547/picture0896if.jpg
These next two pictures are of the scratches on the bottom, the long one is a core shot. The others were repaired but knocked out (along with my front tooth) last winter.
http://img289.imageshack.us/img289/3369/picture0907bb.jpg
http://img289.imageshack.us/img289/6479/picture0912aj.jpg
The next item up for bid is a World Industries Complete Skateboard. It has some ware on it. The under side has scratches on the nose and tail while the middle is pretty unscratched (there were two grind guards on it). The trucks are Fury trucks with Fury bushings and are in good condition. They have been grinded on as well, but not much (I wasn't that good at skateboard and it wasn't used that much). It has Silverado hardware and black speed deamon bearings (I think thats the name). There is one small chip in the nose of the board as well. And I'll toss in a pack of Destructo Abec-5 bearings. And I'm not sure what kind of wheels are on it. You can see all of this in the pictures below:
http://img529.imageshack.us/img529/1401/picture5zq.jpg
(package bearings are in is Pig but bearings are Destructo)
http://img242.imageshack.us/my.php?image=picture0862gy.jpg
http://img72.imageshack.us/my.php?image=picture0876po.jpg
http://img242.imageshack.us/img242/9316/picture0880kd.jpg
I live in Newfoundland so I'll do $100 with bindings and half and half on shipping. For the skateboard setup I'll sell that for $70 and again half and half on shipping. I will consider any trades you have, something electronic is always good and will intrest me.
If you have any questions you can email me at whelan_999@yahoo.ca or pm me here (post before hand). If you need any pictures of something don't hesitate to ask. I have one heatware entry which is in my signature below. Thanks for looking.
-aaron