PDA

View Full Version : Canon Recall: A60 A70 A75 A300 A310 A40 A80 A85 S230 SD100 SD110



malaca
Nov 26th, 2006, 03:49 PM
Service Notice: CCD Image Sensor Advisory (Updated Oct.31, 2006)

It has come to our attention that the vendor-supplied CCD image sensor used in certain Canon digital cameras and digital video camcorders may cause the following malfunction: When the product is used in recording or playback mode, the LCD screen and/or electronic viewfinder may exhibit either a distorted image or no image at all. While reports of this malfunction have been rare in the United States, we have determined that it may occur if the product is exposed to hot and humid environments.

Affected products:
- Camcorders: ZR60, ZR65 MC, ZR70 MC, ZR80, ZR85, ZR90, ELURA 40 MC, ELURA 50
- Digital Cameras A60, A70, A75, A300, A310, S230, SD100, SD110, A40(*), A80(*), A85(*), A95(*), S1 IS(*), S60(*), S200(*), S330(*), S400(*), S410(*), S500(*)
*Models added as of Oct.31, 2006

Malfunction:
It has been confirmed that the connecting parts of the internal wiring of the CCD used in affected products may become disconnected, especially if the affected products are stored or used in high-temperature and high-humidity environments. If this occurs, the signal is not output from the CCD normally in Shooting Mode, which may cause a distorted image or the absence of an image. This malfunction can be confirmed on the LCD monitor screen during shooting. The same malfunction also appears on the recorded image.

Canon's Response:
Effective immediately, and regardless of warranty status, Canon will repair, free of charge, the products listed above exhibiting the above-mentioned malfunction if Canon determines that the malfunction is caused by the CCD image sensor.

Canadian residents are kindly directed to contact the Canon Customer Information Centre for further assistance at 1-800-OK CANON. Support hours are Monday thru Friday - 9:00 AM to 8:00 PM (EST). Alternatively, if electronic support is preferred, please send your email using the Contact Us tab above.

We sincerely apologize for any inconvenience caused by this issue, and appreciate your understanding in this matter. Thank you for your support and patronage of Canon products.


source: http://canoncanada.custhelp.com/cgi-bin/canoncanada.cfg/php/enduser/prnt_adp.php?p_faqid=4304

tjuzer
Nov 26th, 2006, 04:02 PM
They give new one?

goofball
Nov 26th, 2006, 04:05 PM
Thanks!!
I got something weird happening with my S1 IS. I see a reflection of the same image but flipped in my EVF. I'll call them and send it it.

cipher
Nov 26th, 2006, 04:26 PM
This sounds like part of the Sony camera recall for the same problem(s). IIRC, most of Canon's p&s use Sony sensors. If this is part of the Sony recall, then it's another black eye for them.

sportmiester
Nov 26th, 2006, 07:08 PM
They give new one?

See this:


Canon's Response:
Effective immediately, and regardless of warranty status, Canon will repair, free of charge, the products listed above exhibiting the above-mentioned malfunction if Canon determines that the malfunction is caused by the CCD image sensor.

malaca
Nov 26th, 2006, 07:59 PM
They give new one?

This guy (http://www.dpreview.com/reviews/read_opinion_text.asp?prodkey=canon_a530&opinion=33559) says he got an A530 "in exchange for my broken A70, which I think is excellent service from Canon."
That post is dated Oct 2006. Might be USA though.

Popnfresh
Dec 27th, 2006, 05:35 PM
just an update.. i saw this thread first.. and remembered that my old SD100 seemed to have the same sort of issue so i dropped the camera off in 'sauga.. 2 weeks later through puralator not only did i get a working camera.. but i got a brand new SD200! so yea.. not the latest camera on the market (or even close) and i bought a new one after that (A620) but a good deal nevertheless.. so to try to break your old Canon cameras.. i suggest doing what i did. Leave it in ur glove department box 24/7 till the screen doesnt come on. lol.

tjuzer
Dec 29th, 2006, 02:43 AM
just an update.. i saw this thread first.. and remembered that my old SD100 seemed to have the same sort of issue so i dropped the camera off in 'sauga.. 2 weeks later through puralator not only did i get a working camera.. but i got a brand new SD200! so yea.. not the latest camera on the market (or even close) and i bought a new one after that (A620) but a good deal nevertheless.. so to try to break your old Canon cameras.. i suggest doing what i did. Leave it in ur glove department box 24/7 till the screen doesnt come on. lol.

Probably refurb. SD200 worth nothing anyway.

CanadaBoy
May 1st, 2007, 07:59 PM
Is it still too late, I just got a SD200 from my dad's friend for free, but it wont power on!

Kevinck
May 2nd, 2007, 11:51 AM
I had an a70 with this problem. I just resigned to the "Electronics fail" philosophy. I don't think i would have chucked it, I tend to be a packrat when it comes to electronics, but I can't find it anywhere in my house. :-(

CanadaBoy
May 3rd, 2007, 07:09 AM
I had an a70 with this problem. I just resigned to the "Electronics fail" philosophy. I don't think i would have chucked it, I tend to be a packrat when it comes to electronics, but I can't find it anywhere in my house. :-(

Hopefully you will find it because you do not need warranty to get this fixed!

SkeptiKal12
May 3rd, 2007, 09:57 AM
I have an A75 I wouldnt mind exchanging. Wonder if this is still in effect.

nightwalker
Aug 4th, 2007, 07:35 PM
my a75 broke, they just repair it, they don't give you a new one

it clearly states that too on the canon's website...not sure who decided to start the rumour that they give you a new one...

audit13
Aug 7th, 2007, 10:39 AM
I had an A70 with identical screen problems. Got an rma and returned the camera to Sun Camera on Steeles Avenue West. The person told me they repair the original camera and hasn't heard of anyone getting a new or refurbished replacement.

Shiifty
Aug 7th, 2007, 07:20 PM
I have an A75 in pieces, the image has a very pink tone to it. Guess I'll put it back together and see what they say.

Amourek
Aug 7th, 2007, 09:12 PM
I have a out-of-warranty A75 a different malfunction... maybe I should store or use it in a high temperature, high humidity environment to try to get it to malfunction so it qualifies for a recall. :lol:

Goonish
Aug 7th, 2007, 10:18 PM
I have an A85 that's in perfect condition. Hopefully, if it fails in 5 years, Canon will still honor the recall. I love my A85. Very decent manual control for a P&S and small enough to bring anywhere.

BMNB3tches
Feb 29th, 2008, 02:13 PM
Today it is Leap Day, 2008 and this very problem just occurred on my beloved s230 which was purchased in Feb, 2003. The customer service experience was top notch and the recall is still honored to this day. My repaired camera should return in 2 to 3 weeks. Canon - great products and great service. :)

AudiDude
Mar 1st, 2008, 12:53 AM
Mom's A300 died in just the manner stated by the service notice when she arrived in Cuba 3 weeks ago, looks like she's in luck.

wanderingcat
Apr 6th, 2008, 03:35 PM
Thanks OP! :-)

i will going to send my a60 to sun camera:

Location Information SUN CAMERA SERVICE 2150 Steeles Ave W Unit 5
Concord, Ontario L4K 2Y7 Telephone : (905)669-6355

http://www.canon.ca/product_reg.asp?lng=en&pr=3&shlink=http%3A%2F%2Fcanoncanada-loc.custhelp.com/cgi-bin/canoncanada_loc.cfg/php/loc/enduser/loc.php?p_locator_view=ConsumerService

AudiDude
Apr 7th, 2008, 01:48 AM
Mom's A300 died in just the manner stated by the service notice when she arrived in Cuba 3 weeks ago, looks like she's in luck.

A300 was gone for 8 days and is back working perfectly.

bembem
Apr 8th, 2008, 08:10 AM
Sweet!

I have a SD100 that went nuts last year - the screen became distorted. But until then, it has taken easily over 10,000 pictures.

I think it is a guarantee that they WILL NOT have any more SD100's in stock :lol:

If I can get back at least a SD400, I'll be a happy camper.

7jaii
Apr 8th, 2008, 08:21 AM
If I can get back at least a SD400, I'll be a happy camper.

This is not an exchange program. You file RMA with Canon, if they approve they ask you to send it to your nearest authorized repair centre. They will replace the CCD...but you are responsible for other repairs out of warranty.

Just a note to others: repair centres know if you tinkered inside your camera so don't break it on purpose. Some jokers in the U.S. did this when Canon's warranty extension was announced several years ago and had their broken cameras returned or were billed for extra repairs. Repairs are performed by "Independent Authorized Shops"

bembem
Apr 8th, 2008, 09:19 AM
This is not an exchange program. You file RMA with Canon, if they approve they ask you to send it to your nearest authorized repair centre. They will replace the CCD...but you are responsible for other repairs out of warranty.

Just a note to others: repair centres know if you tinkered inside your camera so don't break it on purpose. Some jokers in the U.S. did this when Canon's warranty extension was announced several years ago and had their broken cameras returned or were billed for extra repairs. Repairs are performed by "Independent Authorized Shops"
Boo... the camera is still perfect in every way... in fact, I think I might take some before pics to prove that point.

Hopefully they can NOT repair it then... heck, I'd be happy to have a working SD100...

ponikarovsky
Apr 15th, 2008, 09:04 PM
wouldn't it be cheaper for them to send a new camera rather than spend time and money on fixing my old camera? either way, thank you very much for this info!

i have an old A70 camera that had some problem with photos. some of them, especially white areas came out filled with purple for some reason and I never bothered to do anything with it, so I sent Canon an email.

Shiifty
Apr 16th, 2008, 09:31 PM
I had two cameras that had this problem, and were repaired at no cost at an authorized service centre. Fast service, works great. They were out of warranty too.

ponikarovsky
Apr 17th, 2008, 12:35 AM
Did you bring your cameras into the repair service centre or did you mail them in?

I got an email from Canon today where it just says to "forward the camera to one of the following Canon repair centres"..

I'd rather save on shipping and risk damage to the lenses and just bring the camera into the store..

sarkispc
May 20th, 2008, 11:07 PM
I just mailed my S230 via Xpresspost signature required to the Mississauga location at 1400 Courtney Park Drive East Mississauga ON, L5T1H1

My display was shot within video and camera mode. Research showed me it was the CCD, I called canon they said just send it in with a letter with my info on it.

I paid about 9 bucks shipping, I hope I get it repaired. I thought it was the end of it. I'd be really happy if they do replace with a newer model, but repaired would do just fine.

taysan
May 26th, 2008, 07:40 PM
Keep us posted on what they do. My S230 is having similar trouble - just called Canon and will be shipping mine in this week.

Going to have to keep an eye on my S1 IS as well - it's on the list of models with the bad ccd as well...

the traveller
Jun 6th, 2008, 05:27 PM
Imagine my surprise when I popped in batteries into my old Powershot A70 and the LCD displayed the image with bands of pulsating horizontal strips. I decided to purchased a refurb Powershot SD1000 to replace my A70, for $150 and $15 delivery, from the Canon eStore. I discovered the SD1000 had a white pixel defect on the CCD displaying on videos and photos. I spoke to Canon tech and they said send the unit to their Mississauga service depot. Hardly fair since I had to cover delivery costs again. I figured I might as well ship the A70 for servicing as well re: Service Notice: CCD Image Sensor Advisory.

Likely someone returned the SD1000 to some retail store and it ended up as a Canon eStore refurb which they sold to me. Staples offers free delivery (over $100) and in the case of a defective product they would have covered return costs on defective unit. Unfortunately they didn't have any $150 (new) SD1000s in stock. Now it is a wait and see. Hopefully they won't scratch up the SD1000 I just purchased.

sarkispc
Jun 9th, 2008, 02:15 PM
Keep us posted on what they do. My S230 is having similar trouble - just called Canon and will be shipping mine in this week.

Going to have to keep an eye on my S1 IS as well - it's on the list of models with the bad ccd as well...

As of today, Purolator shipped me my canon camera. As I was expecting to see the repaired camera, I opened the box and saw a refurbished SD630 Digital Elph Camera.

I am very pleased with their service, just took a while but hey its free.

I have to buy an SD card now, because the other one was Compact Flash 256 mb.

If anyone needs the box and manuals for the SD230 please let me know as I have no further use for it. Also I can trade something for the 256mb compact flash and the original 16mb flash it comes with. I also have a USB compact flash reader I can include. Gift cards or anything would do.

taysan
Jun 10th, 2008, 07:41 PM
Funny - today I decided to call them to check status on my submission and was told my refurb sd630 was shipped today!

Not bad, but considering I did pay $550 + tax for my s230 and sd630's can be bought on eBay refurb'd for $150, I think Canon's doing OK.

Now, maybe my S1 will suffer the same fate and magically turn into an S5...

soupnazi
Jul 8th, 2008, 07:07 PM
My old A70 just started having this issue after many years of service. (blank screen with purple lines and same image when taking pictures) It seems if you have an older SD or S model, you may get a newer refurb but if you have an A70/A75, you'll get your repaired camera back. I'll call 1-800 OK CANON and let them know but I'm in no hurry since I have 2 other cams that I use.

http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html

Blackjack
Jul 8th, 2008, 10:19 PM
My old A70 just started having this issue after many years of service. (blank screen with purple lines and same image when taking pictures) It seems if you have an older SD or S model, you may get a newer refurb but if you have an A70/A75, you'll get your repaired camera back. I'll call 1-800 OK CANON and let them know but I'm in no hurry since I have 2 other cams that I use.

http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html

I had the same problem with my A60. However I found a temp. fix. With the lens barrel extended I gently pushed upwards with my thumb. This method cleared up the image for me.

trini
Jul 8th, 2008, 11:14 PM
My A70 gave me the exact problem.
Is it too late to get on this?

soupnazi
Jul 9th, 2008, 03:34 AM
My A70 gave me the exact problem.
Is it too late to get on this?

I think you'll be fine and there isn't an expiry limit on the warrranty according to the official canon statement. My previous link has comments from June 08 and people are still getting their replacements. I think they just had to pay shipping to Missisauga.

Thanks for the suggestion Blackjack. I just tried that and it didn't work. No worries...I'm in no hurry to fix this.:)

nabzif
Jul 10th, 2008, 02:10 AM
My A70 gave me the exact problem.
Is it too late to get on this?

I don't think it's too late. I just took my A70 in yesterday for the same problem (lucky for me the service centre in Calgary is down the street from where i work). No questions asked. No receipt required. They just gave me a order number and letter stating it is covered under warranty and will fix and ship back to me. Now the wait...

trini
Jul 10th, 2008, 08:50 AM
For those who shipped it.
Do you just ship the camera?
I've got the full retail package which i wont need so i'd want to get rid of it but I guess it would cost more to send to them.
What carrier did you use?
Thanks.

nabzif
Jul 10th, 2008, 03:15 PM
For those who shipped it.
Do you just ship the camera?
I've got the full retail package which i wont need so i'd want to get rid of it but I guess it would cost more to send to them.
What carrier did you use?
Thanks.

Just the camera. Here is the email snippet i got regarding what to send them:

"Please include your name, address, daytime telephone number and a brief description of the symptom(s). You may keep all of your accessories such as batteries, cables and storage media."

mok86
Jul 10th, 2008, 09:10 PM
i will be sending in my old sd100 that stopped working like 3 years ago... if it wasn't for the sd100 stopping, i would've never gotten into photography! haha...i also ended up giving 8k to canon thanks to a broken sd100....

mellie_mello
Jul 11th, 2008, 02:01 PM
i just got my s230 replaced with a refurb s450 4 weeks later... ok i guess.

kag
Jul 15th, 2008, 07:45 PM
I sent my A60 in for repair less than two weeks ago and received it back today. It had stopped working about 1.5 years ago so I was pretty happy to hear about that recall. They didn't upgrade me, but I don't care.

achanna
Jul 16th, 2008, 01:23 PM
My S500 was showing red lines/stripes in the LCD and also when you look at the pictures they were like reddish/purple tint.

So after doing some googling I found out that this a known problem and there is a recall from Canon

So I dropped my S500 camera at the misssissauga location - today i got an email with estimate of $157.07 .. WTF ??

Is this problem not part of the recall?
Is my camera not part of the recall

So why are they sending me the estimate???

Did anyone else got the same response?

Thanks
a

sapphire68
Jul 21st, 2008, 07:22 PM
I had a S1 IS which showed problems (distorted images with purple-pink tint) some 2 years ago, and I finally sent it in last week on the 15th.

Today in the mail, I received a new S5 IS. Thanks Canon! Now I have a working camera again. :)

rever75
Jul 25th, 2008, 09:26 AM
OK so I am having a similar issue with my Cannon PowerShot A85. We can take pictures and everything on the LCD looks fine during the process except when we display the picture it has a blurry red tint with horizontal lines across it. I can do video just fine but all pictures display and download with the tint and lines. Could this be related to the CCD issue as the display is fine just the pictures are not.

jkyc
Aug 28th, 2008, 05:54 PM
I just sent out mine on Monday hope that they would send me back soon.

badass
Sep 1st, 2008, 11:06 PM
It started about 3 weeks ago, good the distorted screen but after a couple of shakes it started working again.

Now there are times I just get a blue screen of death.

I have maybe used this cam about 6 tapes worth, got it for my daughters first X-mas, so usage has been very light.

Hopefully they could fix it, really love the 22x zoom!

Will give an update!

Thanks OP for posting info on this!

trixstar
Sep 1st, 2008, 11:37 PM
90% of all Canon digital cameras have problems.. my S500 died from an E18 error after 2 years.. Here is the link..

http://www.engadget.com/2008/08/19/canon-ships-100-million-compact-digital-cameras-90-million-of-t/

I had 2 cameras from canon, both died.. I will never trust canon digitan cameras again. I will only buy their DSLRs..

KorruptioN
Sep 1st, 2008, 11:46 PM
90% of all Canon digital cameras have problems.. my S500 died from an E18 error after 2 years.. Here is the link..

http://www.engadget.com/2008/08/19/canon-ships-100-million-compact-digital-cameras-90-million-of-t/

I had 2 cameras from canon, both died.. I will never trust canon digitan cameras again. I will only buy their DSLRs..

Good job reading :rolleyes:

Care to show where it says 90 million have problems?

badass
Sep 2nd, 2008, 11:04 PM
Called up Canon today and they suggested to take it to the McNicoll location since it is the nearest location for repairs.
Went to the repair centre after work , after describing my problem to the front desk lady she tells me that it didn't seem to be the CCD since it is working again. I told her that it sometime works and sometime I get the scramble zig zag screen.
I mentioned that Canon said that it is a defective CCD and that they will repair it for free, then she mentioned that it could be a combination of CCD and something else and there may be charges.

Hopefully everything goes well!!

rivet
Sep 4th, 2008, 02:59 PM
I have three cameras in the list, A60, S410 and S1 is, but non of them have been getting these problems :( , Maybe I should try to abuse them?:cheesygri

badass
Sep 5th, 2008, 02:55 PM
I bough my cam on December 24 or 26, 2004 so it is almost 4 years and it hasn't been used heavily.
The trouble started about 6 weeks ago when my wife decided to film the baby and it constantly gave a zig zag distorted picture. Well after shaking it a couple of times it started working again. This lasted for about another 3 weeks when we wen't to Japan and the same problem again.
After a couple of shakes it started working but later just got a black screen, thought it was the battery but after putting in fresh battery I realized that it wasn't.

Still waiting, hopefully it could be fixed...

jkyc
Sep 9th, 2008, 03:00 AM
Called up Canon today and they suggested to take it to the McNicoll location since it is the nearest location for repairs.
Went to the repair centre after work , after describing my problem to the front desk lady she tells me that it didn't seem to be the CCD since it is working again. I told her that it sometime works and sometime I get the scramble zig zag screen.
I mentioned that Canon said that it is a defective CCD and that they will repair it for free, then she mentioned that it could be a combination of CCD and something else and there may be charges.

Hopefully everything goes well!!
so u meant u can drop it off at the Mc Nicoll location instead of mailing it..gees..why they made me mail it out...

badass
Sep 13th, 2008, 03:20 PM
so u meant u can drop it off at the Mc Nicoll location instead of mailing it..gees..why they made me mail it out...


Just got my Canon Zr90 back today, and no charge, it's working great again!

The bill was just under $200 but of coarse no charge since it is under warranty from Canon.

They replaced the following:

CCD IC
CCD PCB

This is the reason why I"ll keep on purchasing Canon because of the CR!

Great service at the McNicoll location.

spn
Sep 19th, 2008, 03:54 PM
Just got my Canon Zr90 back today, and no charge, it's working great again!

The bill was just under $200 but of coarse no charge since it is under warranty from Canon.

They replaced the following:

CCD IC
CCD PCB

This is the reason why I"ll keep on purchasing Canon because of the CR!

Great service at the McNicoll location.
Can you post the details of the McNicoll location? I called and they told me there's none near me in Scarborough?

badass
Sep 20th, 2008, 03:00 PM
Can you post the details of the McNicoll location? I called and they told me there's none near me in Scarborough?

It is on McNicoll just East of Victoria Park. I believe it is 1050 McNicoll, if you are going North on Victoria Park, turn right (East) on Mc Nicoll and the first units you will see will be on you left hand side (North about 75-100 feet). Keep an eye out because it is right after a large industrial building (located on the corner of McNicoll and Victoria Park.

Update: On mapquest it is indicating Pharmacy and McNicoll, so it is still 1050 McNicoll
Update again:Aab-Tech Electronics Inc 1050 McNicoll Avenue (416)490-0200

Hope this helps

Cheers and good luck!!

spn
Sep 20th, 2008, 05:12 PM
Thanks!
Will give them a call and hope they can repair my IXY 500 (Japanese S500) :D.

chenry
May 6th, 2009, 09:10 AM
Thought you'd all like to see this:

http://consumerist.com/5241510/above-and-beyond-canon-replaces-broken-5+year+old-camera-for-free

Canon is still honouring the recall program and replaced instead of repaired this person's camera.

So I guess if your camera is old enough and it breaks, they'll just replace it since the parts are likely becoming more and more scarce.

Man, i wish my S410 would stop working lol.

MerkurMan
Jul 15th, 2009, 07:28 PM
I don't mean to bump a dead thread, but I thought I'd throw in my experience with this "recall." I sent in my A85, which was suffering from pinkish-purple lines and waves on the screen, as well as in the captured images. Other than that, it was fully functional. They emailed me back saying that there was sand damage inside, and they wouldn't fix it.

Instead, they offered me an A1100 IS for $174. I'm a little disappointed, seeing as how the fault was with the CCD, and I wasn't complaining about my buttons not working, or sand in the lens, which wasn't the case. I don't really want an A1100, as it only takes 2AA batteries, and has no full manual control. I'm going to email them back requesting a discount on another model... just a headsup to anyone who might have a recalled camera which has other problems. :mad:

mark001
Jul 16th, 2009, 10:55 AM
Wow I'm so glad this thread was resurrected because I have a very old A70 that has the exact problems outlined in the recall. Called up Canon and they said send it in! Hopefully I get a more modern replacement :cheesygri

KDE
Jul 29th, 2009, 09:41 PM
Mine just started doing the flickering and such, Do you think they will replace mine as well? Eventhough its 2009?

tomtomtom
Jul 29th, 2009, 11:34 PM
Wow I'm so glad this thread was resurrected because I have a very old A70 that has the exact problems outlined in the recall. Called up Canon and they said send it in! Hopefully I get a more modern replacement :cheesygri

You think they would just fix the problem and send it back? I have a A75 having the same problem. That thing is such a battery hog, 4 AA battery and takes ancient CF card. I don't want to get stuck w/ this anymore :D

6speed
Jul 29th, 2009, 11:47 PM
Mine just started doing the flickering and such, Do you think they will replace mine as well? Eventhough its 2009?

The only way to find out is to email/call them. My guess is that they would still fix it for you for free. When mine's screen was doing the flickering last year, it's already past the 3 yr warranty period. Then I emailed them and explained the problem which is somewhat related to this recall, they told me to send it back and fixed it within a week. I haven't had a single problem yet since then.

nelsonmp5
Aug 3rd, 2009, 09:12 PM
Wow I'm so glad this thread was resurrected because I have a very old A70 that has the exact problems outlined in the recall. Called up Canon and they said send it in! Hopefully I get a more modern replacement :cheesygri

+1 Let me know what you get. I've got one too. Hopefully you get something new otherwise at least a digic II camera that can take CHDK.
CF's! Remember those? Remember those IBM microdrives? 500mb, my friend got one, too bad... Bought a 16gb Kingston SDHC class 4 last boxing day $20! (sorry for the trip...)

mark001
Aug 12th, 2009, 08:33 PM
I guess I was one of the unlucky few who Canon actually managed to fix the problem! It was about a week before I realized I forgot about the camera so I called up Canon and asked for a status update but the CSR told me that the reason why it took so long is because Canon actually got parts to repair the A70 model from Sony. According to the w/o the CCD was completely replaced so if you have an A70 or model that uses the same 3.2mp CCD chances are they can actually repair it.

Don't get me wrong I'm happy that Canon was willing to reapir it after being out of warranty for so long but I would have been much happier if they just replaced it with a more modern point & shoot considering my other camera is an XSi.

rivet
Aug 16th, 2009, 11:21 PM
The source link in the first post does not work anymore, why they didn't keep the link as they didn't specify a date, just find out my A60 does not work any more, LCD shows strange waves, lines and the picture it takes shows the same thing, is this the malfunction in the Canon Recall?:D

KDE
Aug 17th, 2009, 03:59 PM
They sent me an email, mine is being repaired!!! WHOOO OOO!!
Thanks for the links guys! :D:D:D:D:D:D I should be getting it back next week.

satseeker
Sep 15th, 2009, 11:57 AM
Sent in S230 to Calgary in March 2009, 3 weeks later received a brand new SD1100. I think they will replace the S series but not the A series, because my friend has a A series and she was told to take it to the nearest Canon auothorized repair shop and it was repaired at no cost.

gjdealseeker
Sep 16th, 2009, 11:43 AM
My camera (Canon S410) started flickering with a purple screen last night. It never happened before and did it twice while i was taking a few pics. I played around with it somemore and it didnt seem to happen again, but who knows if it will happen again.

Has anyone else sent in a Canon S410? Have they fixed it? Or have they send you a replacement model? I would love a free upgrade.

Did you guys have to pay for shipping? Or did they send you a postage paid? They told me I had to pay for shipping.

Thanks

satseeker
Sep 28th, 2009, 01:14 AM
Paid $15 on my own shipping fee and send a S400 to Ontario, they fixed the camera, no new camera replacement :cry:

cindyhnc
Feb 25th, 2010, 01:39 PM
WOW, Canon truly stands behind their products. I have a Canon A70 that showed the LED problem on February 13, 2010. Called Canon on February 15 and received the return UPS Label via email. Shipped February 16, 2010. The camera was received February 18, 2010, and today, February 25, 2010 the repaired camera was received by me. Can't think of another company that honors a recall 4 years after it was discovered. My hats off to Canon and I will certainly continue purchasing their products. By the way, I have had this camera for 7+ years.

st7860
Feb 25th, 2010, 02:04 PM
wow they actually fixed it, or did they send you a new one?

napoleon1769
Feb 25th, 2010, 02:16 PM
Has to be a new one. They don't make it anymore. I still have to send in mine! I just didn't want to pay for shipping but apparently you got a UPS label.

st7860
Feb 25th, 2010, 02:19 PM
Has to be a new one. They don't make it anymore. I still have to send in mine! I just didn't want to pay for shipping but apparently you got a UPS label.

which model did they send to you?

thelefteyeguy
Feb 25th, 2010, 02:20 PM
WOW, Canon truly stands behind their products. I have a Canon A70 that showed the LED problem on February 13, 2010. Called Canon on February 15 and received the return UPS Label via email. Shipped February 16, 2010. The camera was received February 18, 2010, and today, February 25, 2010 the repaired camera was received by me. Can't think of another company that honors a recall 4 years after it was discovered. My hats off to Canon and I will certainly continue purchasing their products. By the way, I have had this camera for 7+ years.

welcome to Canada :cheesygri

badass
Feb 26th, 2010, 10:07 PM
This is the reason why I keep buying Canon products!!

Cheers!

porkchopbread
Apr 7th, 2010, 01:55 AM
wow. i sent in my ixy 320 (japanese model) i bought in 2003. i had the problems with my memory card saying it had an error all the time. it's been sitting in my drawer for a few years, found out about the recall, sent it in. and just got my replacement today! wasn't expecting much, but they sent me a SD980IS! very cool!! thanks guys!

gwcanadiana
Apr 9th, 2010, 04:08 PM
Has anyone had to pay for shipping? I was told I had to pay. Even though I know for a fact Americans don't and read that some Canadians didn't. How do I get free shipping?

AzureD
Apr 9th, 2010, 04:57 PM
aw shucks i didnt see this thread earlier, I just threw away my defective A310 earlier this month...

Pariah
Apr 9th, 2010, 07:32 PM
Hey guys! Do you know where I can buy a Canon 940 around 220??

DaMooli
Apr 30th, 2010, 12:02 AM
I have to add my bit as well. Had a Canon A70 that I purchased back in 2003 (I think) which started having the sensor issue mentioned in the thread last month. The very next day, it had a lens issue. The lens was stuck and the camera wouldn't turn on. I pushed the lens back in but the problem persisted.

I emailed Canon, and they said to send it in for the sensor repair. I printed that email and sent it in with the camera. I was expecting a call from them for the lens issue (was not under warranty/recall) but a week or so later, I get my camera back. Both sensor and lends issues fixed.

Good show Canon ..

twin
May 1st, 2010, 12:41 PM
No more free repair for A40/S200/S330 digital cameras.


To Owners of the PowerShot A40/S200/S330 digital cameras

Thank you for using Canon products.

We made an announcement in October 2006 about our free repair services to address a problem with the CCD image sensor used in certain Canon digital cameras. However, (as the service period for this product has now ended,) kindly note that we will no longer provide such free repair services for the Affected Products below after March 31, 2010.

Accordingly, repair services for the Affected Products below that are received after April 1, 2010 will be handled in accordance with Canon's general repair standards and regulations.

http://canoncanada.custhelp.com/app/answers/detail/a_id/16906

Free repair for S230 digital camera until July 31, 2010.


To Owners of the PowerShot S230 digital camera

Thank you for using Canon products.

We made an announcement in October 2005 about our free repair services to address a problem with the CCD image sensor used in certain Canon digital cameras. However, as the service period for this product has now ended, kindly note that we will no longer provide such free repair services for the affected product below after July 31, 2010.

Accordingly, repair services for the affected product below that are received after July 31, 2010 will be handled in accordance with Canon's general repair standards and regulations.

http://canoncanada.custhelp.com/app/answers/detail/a_id/17708

Nofirstname
May 1st, 2010, 04:45 PM
Folks,

My daughter has HP Photosmart E337 camera and complains about 'washed' pictures. I'm not a specialist and do not understand much about cameras.

Thinking to buy her a Canon, within $ 200 - 250, and would appreciate your recommendations.

Criteria is just one - as much as better quality of picture (no need for fancy options and manual adjustments) within this budget.

Thanks.

st7860
May 1st, 2010, 04:46 PM
futureshop has the canon sd1200 10 megaipxel model on sale for $180 this week.

Paxonator
May 9th, 2010, 10:22 PM
Wow I was just going to buy a new camera because my A75 died last month. Now I may not have to!

gotak
May 9th, 2010, 11:00 PM
The A75 is pretty old.. might be a good idea to see what's out there. I have a A75 it's some where in the house.. not sure where lol.

Paxonator
May 10th, 2010, 01:20 AM
Yeah I still had thoughts of buying a new camera and using the A75 as more of a party camera. Just have to decide on a camera to buy but there are to many out there!

black_prelude
May 13th, 2010, 03:00 PM
Thanks for this thread! I sent in an old S230 (cost me $10 to courier) and received an email saying it will be replaced with a SD780! Whoo-hoo!

ROCKNROLLA
Jun 7th, 2010, 05:17 PM
My S500 was repaired but now the mode selector wheel (auto, manual, panoramic, video) won't change the mode to anything other than auto AND pics taken with a flash look over-exposed!

Anyone else have trouble with their camera after sending it in for CCD repair?

Is there a toll free support number I can call to log the issue?

Thanks.

whiteGSR
Jun 15th, 2010, 05:03 PM
Thanks for this thread! I sent in an old S230 (cost me $10 to courier) and received an email saying it will be replaced with a SD780! Whoo-hoo!

lucky you. i just sent mine in and it looks like they are just going to repair it :(

[EDIT] Just received my camera in the mail today, and it's a brand new SD780IS :D

graceli229
Jun 29th, 2010, 04:20 PM
I received my canon A75 today, it was repaired, not replaced.

Worldy
Jun 29th, 2010, 07:28 PM
I have a ten years old SD100, it sat in the drawer for roughly 6 years.
the battery is dead.

:lol:

rivet
May 2nd, 2011, 03:55 PM
Well, I am bumping an old thread, but I think this recall is still in effect. I send in an A60 last time, too bad, it is repaired not replaced. And I am thinking whether it worth the hassle and shipping fee as nobody wants my A60, not even sure if it worths the shipping fee I paid in the used market:cry: :).

By the way, I think the service recall is only working for 5 years, so you have to send your old camera by Nov. 2011 to get the service done for free.

bluenoser23
May 4th, 2011, 09:19 PM
My A95 has to go in - started up with the sensor problem last year but it's been collecting dust since then. Thanks for the reminder.

trixstar
May 8th, 2011, 10:24 AM
my s500 i took out of the drawer has the same problem too!! good tihng i noticed this thread. I hope they'll take it back to fix since my dad really liked it. Paid $500 for that thing when it came out

rivet
May 9th, 2011, 01:20 PM
They should fix it. I just send my S410 in, wish they can replace it instead of repairing it though.

my s500 i took out of the drawer has the same problem too!! good tihng i noticed this thread. I hope they'll take it back to fix since my dad really liked it. Paid $500 for that thing when it came out

rivet
May 11th, 2011, 02:12 PM
Just got my S410 back, too bad they don't replace it with new models.