View Full Version : Xbox 360 Wireless Help
ChampUz
Aug 15th, 2009, 09:49 PM
Okay
So this is it.
I have a wireless router Hooked to my Modem.
I have a WRT54G With tomato firmware Hooked to my 360 via ethernet.
Now those 2 are 2 floors apart.
What settings do I put on my wrt54g to hook onto my wireless router hooked to my modem?
thanks..
infamouskid
Aug 15th, 2009, 10:00 PM
Okay
So this is it.
I have a wireless router Hooked to my Modem.
I have a WRT54G With tomato firmware Hooked to my 360 via ethernet.
Now those 2 are 2 floors apart.
What settings do I put on my wrt54g to hook onto my wireless router hooked to my modem?
thanks..
k i dont know what you are trying to do or how this is physically done. but maybe you can explain physically how your are connected and how its configured.
is it like this?
modem -- > wrt54gl w/tomato -- > wireless router -- > computers and xbox??
ChampUz
Aug 15th, 2009, 10:21 PM
k i dont know what you are trying to do or how this is physically done. but maybe you can explain physically how your are connected and how its configured.
is it like this?
modem -- > wrt54gl w/tomato -- > wireless router -- > computers and xbox??
Naw, Like this.
Modem>Wireless Router Dlink.
Xbox 360 > WRT54G / w tomato
Im tryna get the router with tomato to link up with the dlink
infamouskid
Aug 15th, 2009, 10:29 PM
Naw, Like this.
Modem>Wireless Router Dlink.
Xbox 360 > WRT54G / w tomato
Im tryna get the router with tomato to link up with the dlink
why?
ChampUz
Aug 15th, 2009, 10:33 PM
Cause the 360 does not have any internet connectivity...it's hooked up wrt54g tomato router so someway the tomato router can catch the dlinks signal and get internet to my 360
infamouskid
Aug 15th, 2009, 11:02 PM
OOHHHH you want to setup a bridge or repeater.
you should install dd-wrt.
ChampUz
Aug 15th, 2009, 11:02 PM
Yar. Does tomato support bridge or not.
Spectre
Aug 16th, 2009, 02:36 AM
Tomato does have a wireless bridge mode. I have it installed on my Asus WL-520GU(hooked up to my XBOX 360 via ethernet) and it works fine.
It should be under: Basic/Network/Wireless. Select "Wireless Ethernet Bridge" from the 'Wireless Mode' pull down.
Perhaps this can help:
http://www.wi-fiplanet.com/tutorials/article.php/3810281
http://www.wi-fiplanet.com/img/2009/03/wirelessethernetbridge.jpg