HPI Nitro RS4 RTR3 Evo - 1/10 R/C Gas Powered Sedan

[Qube]

MORE INFORMATION: http://www.hpiracing.com/kits/rtrnitro3evo/rtr3-m.htm


-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


This is the 1/10 scale glow powered, radio controlled, 4 wheel drive HPI Nitro RS4 3 Evo BMW M3 on-road ready-to-run (100% assembled) car.

FEATURES: Chassis: 0.098" (2.5mm) thick 6065 aluminum, purple anodized, countersunk
Drive: Four wheel
Drive Type: Shaft
Engine: .15 cu in (2.4cc) HPI T-15 with ABC construction, dual needle 5.5mm rotary carburetor, glow plug and large heatsink head, engine starts by included electric Roto Start system
Exhaust: Dual chamber tuned pipe with header
Radio: AM 2-channel pistol grip with steering and throttle trims, servo reverse, and steering dual rate
Fuel Tank: 2.5oz (75cc) flip top cap
Clutch: 2-shoe
Transmission: Two-speed with adjustable shift point and changeable gear ratios
Ball Bearings: Rubber sealed type included (18 total)
Shocks: Four oil-filled with coil-over spring, composite bodied
Main Gears: 47 and 43 tooth, nylon construction
Gearbox: Sealed front and rear
Differentials: Planetary geared, limited slip front diff
Brakes: Single disk ALUMINUM VENTED UPGRADE
Radio Tray: Sealed and removable
Body: Pre-painted metallic silver BMW M3 coupe with body trim and sponsor decals applied
Bumper: Front foam
Suspension: Double wishbone
Camber Tie Rods: Non-adjustable, camber is the angle at which the tires sit vertically
Steering Tie Rods: Non-adjustable, caster/toe-in is the angle that the tires point inward as viewed from above
Steering: Bell-crank
Servo Saver: Included

INCLUDES: HPI Nitro RS4 3 Evo with BMW M3 body, oil-filled shocks, .15 engine, roto start, tires, foam inserts, wheels, 2ch AM radio, wheel wrench 18 & 22 tooth clutch bell, 47 & 43 tooth spur gear, antenna tube, receiver box, air filter, glow plug, antenna tube, rear wing, and illustrated instruction manual

SPECS: Vehicle-
Length: 17.25" (430mm)
Width: 8" (203mm)
Height: 4.8" (124mm)
Weight: 3.85lbs (1745g) approximate
Wheelbase: 10.1" (256mm) (wheels on-center front-to-rear)
Tread: Front-6.75" (171mm) Rear-7" (178mm) (wheels on-center side
to-side)
Front Track: 7.25" (184mm)
Rear Track: 7.75" (197mm)
Ground Clearance: 0.29" (7.5mm)
Body-
Length: 17.25" (430mm)
Width: 7.75" (197mm) at rear wheels (widest point)
7" (178mm) behind from wheels (thinnest point)
Height: 4.5" (114mm)


-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


UPGRADES:

1. Powerline Aluminum Rear Hub Carriers



2. Powerline Aluminum Front Knuckles



3. Ofna Titanium Turnbuckles



4. Aluminum Vented Disc Brake (not shown)

5. Silver Tuned Pipe (see below)

6. Ofna Red Anodized Fuel Filter (see below)

7. Stiff Rear Swaybar Upgrade (not shown)

8. Stock Silver BMW M3 200mm Body (see below)

9. Includes Award Winning HPI 200mm Skyline Body (Featured in HPI Racing Gallery, light kit not included)




-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


GENERAL IMAGES:






-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


GENERAL NOTES:

Car is ready to run as is (add nitro). Great condition. Includes everything including box and upgrades above. Price? $375. Firm.

Many people are asking why I'm selling this and how old it is... Well...

The whole kit is just a shade under three months old. I just received a NTC3 complete with starter box and accessories (thanks RCJEFF!) so away this goes. I also have an LD3 so parts can be almost interchanged between it and the NTC3... there you have it. Now buy it!

[Qube]

Bump!

[Tetsuo]

oh god....i wish i had the money

[tikoy]

My hand's itchin!!!!

[rcjeff]

bump

[426Hemi]

holy crap!!!

if this had been posted in june, before i bought my xbox, i'd be all over it!!!

nice price btw

[fulrach]

wow... qube... that's one sexy car man!

[Qube]

Bumpity!

[Qube]

Bump!

[Qube]

Bump!

[Qube]

Bump!

[toyz4roy]

looks awesome!! free bump

[TenzoR]

must resist ... must resist .. i already quit R/C cuz of school $$ ... must resist ...

[Qube]

To clarify what you need to run this...

8xAA batteries for the transmitter
1x7.2 6-cell battery stick pack (for Roto-Starter)
Wonderful Nitromethane!
Glow ignitor

None of this comes in a brand new RTR package for those wondering. Those purchasing, I will gladly show you how it works (on the weekend).

[Qube]

Bump!