Wireless AC > Powerline.
-
Jan 22nd, 2013 11:42 PM #31
Reply With Quote
LOG IN TO THANK
No one has yet thanked wilsonlam97 for this post.
-
Jan 23rd, 2013 06:13 AM #32
110v or 110/220?
Anybody who has received them know if these are rated at 110v only or for both 110/220v? Need a pair for my vacay home which is 220v. When it comes to ratings the product page js different than the actual sticker onthe item when you receive it ive seem.
Last edited by mirzank; Jan 23rd, 2013 at 06:26 AM.
Reply With Quote
LOG IN TO THANK
No one has yet thanked mirzank for this post.
-
Jan 23rd, 2013 09:15 AM #33
Reply With Quote
LOG IN TO THANK
No one has yet thanked CanuckGreg for this post.
-
Jan 23rd, 2013 10:33 AM #34
Both my Trendnet and Belkin powerline ethernet adapters are 110-240v, so probably they are all dual voltage. Makes sense, there's no reason why they wouldn't be. But considering that household power wiring standards can be different in different countries, you might need to experiment to know if they will work in another country that uses 220v. In Canada 220v is provided at some outlets by using the difference between two phases. I'm not sure how that affects transmission of the signal. In other countries where the base utility power is 220v there might only be one phase, which would be fine for powerline ethernet transmission.
Reply With Quote
LOG IN TO THANK
No one has yet thanked JamesA1 for this post.
-
Jan 23rd, 2013 10:39 AM #35
Reply With Quote
LOG IN TO THANK
No one has yet thanked yuprules for this post.
-
Jan 23rd, 2013 11:11 AM #36Deal Fanatic
[OP]




- Join Date
- Jan 8th, 2002
- Location
- Waterloo, ON
- Posts
- 6,676
Read upthread to this post.
_______________
veni, vidi, Visa
——————————
Bylo's theorem of RFD posting: Let the number of posts between a reply and the post to which it refers be n. Let the probability that the poster read and comprehended the post to which they replied be p.
Theorem: p = 1/(n+1)²
Reply With Quote
LOG IN TO THANK
No one has yet thanked bylo for this post.
-
Jan 23rd, 2013 11:14 AM #37Deal Fanatic
[OP]




- Join Date
- Jan 8th, 2002
- Location
- Waterloo, ON
- Posts
- 6,676
_______________
veni, vidi, Visa
——————————
Bylo's theorem of RFD posting: Let the number of posts between a reply and the post to which it refers be n. Let the probability that the poster read and comprehended the post to which they replied be p.
Theorem: p = 1/(n+1)²
Reply With Quote
LOG IN TO THANK
No one has yet thanked bylo for this post.
-
Jan 23rd, 2013 11:54 AM #38
If you plug this into one of the wall outlets, will there be space to plug anything else into the other outlet?
Reply With Quote
LOG IN TO THANK
No one has yet thanked Tender for this post.
-
Jan 23rd, 2013 12:59 PM #39Deal Fanatic
[OP]




- Join Date
- Jan 8th, 2002
- Location
- Waterloo, ON
- Posts
- 6,676
Yes. In fact the plugs on the Tenda aren't even polarized so you can plug the unit upside down and it will still work fine.
I have a power bar plugged into the bottom socket of a duplex outlet. It has to be that way because the molded AC power cord comes out from the bottom of the plug. If I plugged it into the top socket in the AC duplex the power bar's plug would block the bottom socket. I had no choice but to plug the power bar in the bottom socket and the Tenda upside down in the top socket. As a bonus that way the Ethernet jack is now at the top of the Tenda unit so it's more convenient too._______________
veni, vidi, Visa
——————————
Bylo's theorem of RFD posting: Let the number of posts between a reply and the post to which it refers be n. Let the probability that the poster read and comprehended the post to which they replied be p.
Theorem: p = 1/(n+1)²
Reply With Quote
LOG IN TO THANK
No one has yet thanked bylo for this post.
-
Jan 23rd, 2013 01:07 PM #40
phew, I thought about that after I ordered them..the plug I will be using is nowhere near another one
Reply With Quote
LOG IN TO THANK
No one has yet thanked dunlop for this post.
-
Jan 23rd, 2013 01:12 PM #41
I've been using the DLINK PowerLine AV's for a while due to poor wifi connectivity in my house. I was an instant fan of the simple setup of these devices. Speeds are much faster than my 2-3 bar wifi connection.
Reply With Quote
LOG IN TO THANK
No one has yet thanked sw1ft for this post.
-
Jan 23rd, 2013 01:21 PM #42
It's ok to use extension cords or multi-plug adapters. They should cause only a slight reduction in signal quality. But beware of power bars that have either protection filters or a power light (especially a neon power light). Those will degrade your powerline ethernet signal. In general having anything else plugged into the same wall outlet may degrade the signal - the only way to tell how much is to experiment. Some things are worse than others.
The problem is that powerline ethernet uses a high-frequency low-power signal on the powerline. Any kind of bridge across the hot and neutral leads that leaks current at high frequency will impact powerline ethernet, even though the effect is too small to notice on normal low-frequency 60 Hz AC power. Any device with a high-pass filter across the power leads will not pass 60 Hz current, but will leak like a sieve at powerline ethernet frequencies. A neon lamp is directly connected across the power leads -it won't pass enough current to leak a significant amount of power, but quite enough to sabotage powerline ethernet signalling.Last edited by JamesA1; Jan 23rd, 2013 at 01:29 PM.
Reply With Quote
LOG IN TO THANK
No one has yet thanked JamesA1 for this post.
-
Jan 23rd, 2013 01:27 PM #43Deal Fanatic
[OP]




- Join Date
- Jan 8th, 2002
- Location
- Waterloo, ON
- Posts
- 6,676
Also UPS.
That's one downside to Powerline. If you have DSL Internet and have your modem, PC etc. on UPS so you can access the Internet during a power outage then Powerline is not a viable solution. You can't plug those devices into a UPS. When power goes out the Powerline units will lose power and your Internet with it._______________
veni, vidi, Visa
——————————
Bylo's theorem of RFD posting: Let the number of posts between a reply and the post to which it refers be n. Let the probability that the poster read and comprehended the post to which they replied be p.
Theorem: p = 1/(n+1)²
Reply With Quote
LOG IN TO THANK
No one has yet thanked bylo for this post.
-
Jan 23rd, 2013 01:29 PM #44
Reply With Quote
LOG IN TO THANK
No one has yet thanked yuprules for this post.
-
Jan 23rd, 2013 01:40 PM #45Deal Fanatic
[OP]




- Join Date
- Jan 8th, 2002
- Location
- Waterloo, ON
- Posts
- 6,676
Too bad.
I have a notebook on UPS along with a DSL modem. When power goes out I can surf for hours. (POTS and DSL are battery-backed by the carrier.)
In fact back when we had a two-day long outage (in 2003?) I was surfing by candlelight long into the night. There was something really quaint about that combination of technologies._______________
veni, vidi, Visa
——————————
Bylo's theorem of RFD posting: Let the number of posts between a reply and the post to which it refers be n. Let the probability that the poster read and comprehended the post to which they replied be p.
Theorem: p = 1/(n+1)²
Reply With Quote
LOG IN TO THANK
No one has yet thanked bylo for this post.
Search Forums

