Peak Saver Program

[ozymandias]

On my peaksaver thermostat, there is OFF, AUTO and CIRC setting for the fan. Just touch (CIRC or AUTO or whatever is your setting right now) and these three options should show up. Select OFF for the fan as well.

OFF is off on my system. No recirc. If you really want it to be completely off, you could turn off your furnace switch (not ideal as it turns off the display of temp and then you'll also need to turn it back on whenyou want to heat/cool).

[cutesnoopydoll]

The program is no loner available...

[kiasu]

Ok. Had the PeakSaver theromostate installed a year ago and recently having issue.

The indoor temp never hit the schedule temp we set. Esp last few days where outside was -30c but the inhouse temp is btw 16c and 18c never go up to 20c. The heat does come out but it doesnt heat up the house. Anyone has the same issue?

Just called PeakSaver and they are sending tech over this afternoon. Will see what happen.

[da_guy2]

Ok. Had the PeakSaver theromostate installed a year ago and recently having issue.

The indoor temp never hit the schedule temp we set. Esp last few days where outside was -30c but the inhouse temp is btw 16c and 18c never go up to 20c. The heat does come out but it doesnt heat up the house. Anyone has the same issue?

Just called PeakSaver and they are sending tech over this afternoon. Will see what happen.

You sure its the PeakSaver thermostat? You said the heat comes, but does it turn off? If the heat is coming on, and running continuously but not getting up to temperature them its your furnace no the thermostat.