-
Dec 16th, 2005 07:42 PM
#1
Sold
MSI 875P Neo-LSR
I paid almost $200 for it last year; right now I'm selling for $50 firm. Looking to trade in person in Toronto. You must use a USB keyboard because the keyboard PS/2 port doesn't work. The mouse PS/2 port works fine though. Other than that, the board is in perfect condition.

Specifications:
CPU
• Supports Socket 478 for Intel® Pentium 4 (Northwood/Prescott) processor
• Supports up to 3.2GHz/FSB 800
• Supports FSB 533/800MHz
Chipset
• Intel® Canterwood 875P Chipset
- Supports FSB 533/800 MHz
- Supports ECC memory
- Support Single or Dual channel DDR 400*/333/266 memory up to 4GB
- Support AGP 8x or 4x at 0.8V (AGP 3.0) or 4x at 1.5V (not support 3.3V)
• Intel® ICH5 Chipset
- Integrated Hi-Speed USB 2.0 controller, 480Mb/sec, 8 ports
- 2 Serial ATA/ 150 ports
- 2 channel Ultra ATA 100 bus Master IDE controller
- PCI Master v 2.3, I/O APIC
- Supports both ACPI and legacy APM power management
FSB
Supports 533/800MHz Intel NetBurst micro-architecture bus.
Main Memory
• Supports 4 unbuffered DIMM of 2.5 Volt DDR SDRAM
• Supports ECC memory
• Supports up to 4GB memory size
• Support Single or Dual Channel DDR 400*/333/266 MHz and up (*In order to use DDR 400, FSB 800 CPU is required)
BIOS
• The mainboard BIOS provides "Plug & Play" BIOS which detects the peripheral devices and expansion cards of the board automatically.
• The mainboard provides a Desktop Management Interface (DMI) function which records your mainboard specifications.
On-Board IDE
Dual Ultra DMA 66/ 100 IDE controllers integrated in ICH5R
- Supports PIO, Bus Master operation modes
- Can connect up to 4 Ultra ATA drives
Serial ATA/ 150 controller integrated in ICH5R
- Up to 150MB/s transfer speed
- Can connect up to 2 Serial ATA drives
Audio
6 Channel software audio codec ADI S/W 5.1 channel audio 1980
- Compliance with AC97 v2.2 Spec
- Meet PC2001 audio performance requirement
- Support SPDIF out via S-Bracket only
LAN
Intel® 8262EZ
- Integrated Fast Ethernet MAC and PHY in one chip
- Supports 10Mb/s, 100Mb/s
- Compliance with PCI 2.2
- Supports ACPI Power Management
On-Board Peripherals
- 1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes
- 2 serial ports (COM A + COM B)
- 1 parallel port supports SPP/EPP/ECP mode
- 8 USB 2.0 ports (Rear x 6 / **Front x 2) (**Front USB ports are supported by pin-out)
- 1 Line-In/Line-Out/Mic-In port
- 2 PS/2 connectors (only mouse connector works)
- 1 LAN RJ45 connector
Link to MSI specs page
Last edited by blueangel2323; Dec 18th, 2005 at 07:47 PM.
-
-
Dec 17th, 2005 12:20 AM
#2
Wow what a deal on 875 chipset
-
Dec 17th, 2005 12:52 AM
#3
i will take it, just send me your info where to pickup
-
Dec 17th, 2005 07:29 PM
#4
i'll take it, PM sent with my contact #
-
Dec 18th, 2005 12:37 PM
#5
-
Dec 18th, 2005 01:25 PM
#6
Wow, lots of responses real quick. Now pending to the first person who replied who can meet up locally.
-
Dec 18th, 2005 07:46 PM
#7
Board has been sold. Thanks for all the enthusiasm. Unfortunately I could only sell to one person, so first come first serve.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules