voip.ms faxing

[tommo4lyfe]

Does faxing on voip.ms work? Stupid Tarion's MyHome logging doesn't work and I need to submit a form.

[EPcjay]

Does faxing on voip.ms work? Stupid Tarion's MyHome logging doesn't work and I need to submit a form.

I've faxed to many places with my VOIP.ms with no issues.

Only time it failed was faxing to EQUIFAX. Not sure why.

[tommo4lyfe]

Thanks. I read somewhere faxing on voip is not 100%. I hope it works!

[andrewhaji]

Faxing works just fine for me. Make sure you are using the G.711 codec and that you've set the following settings on your fax machine:

1) Set the lowest speed possible - on my machine this required turning V.34 OFF.
2) Turn OFF error correction.
3) Set the transmission quality to "standard".

[JAC]

For best results you need an ATA with T38 support, like the Linksys SPA3102.

Network Jitter Level – Very High
Jitter Buffer Adjustment – Disable
PreferredCodec to G711u
Set “Silence Suppression Enable” to No
FAX Enable T38 is set to Yes
“Echo Canc Enable” should be set to No
“Fax Passthru Method” to REINVITES.

[canabiz]

Hello guys, I have been using voip.ms for the past year and I am really pleased with the service and the savings.

I recently picked up a Brother all-in-one multifunction inkjet printer. I set it up earlier tonight and everything is working fine, except for the fax through voip.ms

What I did was to simply hook up the telephone line from the printer to the Linksys PAP2T, powered it off then powered it on again.

I proceeded to send 1 fax to various numbers but the printer kept dialing and finally gave up. The Transmission Verification Report stated the result is *busy*

I then attempted to follow the guide here http://www.voipmechanic.com/voip-fax...gs-linksys.htm to change some settings.

Here's a screenshot for Line 2, can you guys tell me if that is perfectly OK for fax or if I need to do something else to make it working. Thank you.

[JAC]

The PAP2T-NA has fax pass-though using G.711.

Encountering Difficulties Sending Fax

[canabiz]

The PAP2T-NA has fax pass-though using G.711.

Encountering Difficulties Sending Fax

I tried that but it's still not working, Jac. Thanks for the link though.

I will try to send a fax to my residence from work today and see if I could receive something at home.

I don't know if it makes any difference but this is a wireless printer e.g. I do not connect it to the desktop via USB.

Guess this is something I will work on this weekend lol, I know fax through VoIP is flaky and the PAP2T is not an ideal ATA for fax but if it works for others (albeit sparingly), it should work for me.

[canabiz]

I was able to send a fax by registering Line 2 e.g make sure it has the same username and points to the same server as Line 1.

I will try to send a fax from the office on Monday. Curious to check out the quality when I get back to work.

Wasn't too hard after all...

[canabiz]

Guys, just wondering if you order a separate DID and use it for fax and keep the main DID for phone and voice mail?

I was not able to receive fax at home and after some troubleshooting, I realized I needed to register Line 2 and make sure it will ring the same time as Line 1 which is associated with voice mail.

I wonder what happens when somebody calls, will the fax kick in or will the voice mail kick in? I don't send and receive faxes a lot so I would hate to miss out on important voice mails.

Maybe I should keep it simple and get another DID, what do you guys think?