Thread: Win XP Pro Setup Shuts Down?
-
Dec 24th, 2006 02:40 PM
#1
Win XP Pro Setup Shuts Down?
So I have a computer and I purchased a new motherboard/case. I'm just reformattin and reinstalling windows. Everytime I install windows it will reformat a partition just fine, but when it's copying files(still in.."dos") or after it first copies files and after it restarts it self, the computer will just shut down.
I've tried taking out various components and I have no clue what the problem could be.
Any help?
-
-
Dec 24th, 2006 03:17 PM
#2

Originally Posted by
nkwu
So I have a computer and I purchased a new motherboard/case. I'm just reformattin and reinstalling windows. Everytime I install windows it will reformat a partition just fine, but when it's copying files(still in.."dos") or after it first copies files and after it restarts it self, the computer will just shut down.
I've tried taking out various components and I have no clue what the problem could be.
Any help?
format your HD to see if there's any bad sector.
-
Dec 24th, 2006 03:22 PM
#3
^setup format's the drive just fine, it only has issues when copying the files after it formats
-
Dec 24th, 2006 03:31 PM
#4
maybe your cd is scratched....trying burning a copy and using the new copy to set up Windows.
-
Dec 24th, 2006 03:35 PM
#5
hmm, I tried two copies already....
-
Dec 24th, 2006 03:39 PM
#6
I had the same problem. Ended up using 4 CDs.
-
Dec 24th, 2006 04:45 PM
#7
^jeeze, really? cuz I've got it to copy it's just after it boots when ti says "3 minutes remaining" it restarts. I'll try ANOTHER copy.
-
Dec 24th, 2006 05:11 PM
#8
just remind u u must delete the partion before building 1 on top of it or else u would just be put windows on top a new windows... do u have geiune copy of windows XP?
-
Dec 24th, 2006 09:15 PM
#9
the copies i am trying are genuine, and i deleted all partitions on the hard drive before touching any of it.
I tried many differnc opies, and took out all parts but the essentials for my PC, it now gets PAST the initla(blue screen dos based) copying files and teh compute restarts
when the setup resumes (gui with the 39 minutes remaining and the foru progress dots in the bottom right), the computer restarts almost immediately.
EDIT: the problem is still happening, however, after removing the CD from it's drive I noticed that eeven when waiting for hte user to specify a new location for the win XP files, the setup shuts down around the same time period after the computer has booted up. It's frustrating
Last edited by nkwu; Dec 24th, 2006 at 11:05 PM.
-
Dec 25th, 2006 01:33 AM
#10
Newbie
If it shuts down after a certain amount of time - regardless of whether or not it is copying as you have now indicated - the likely culprit is overheating.
First check that all of your fans are spinning/blowing air (power supply, cpu, and video card if applicable). If they seem to be in order your CPU fan/heatsink may not be making proper contact with your CPU - did you apply any thermal grease when you installed it in the new motherboard?
If you have applied thermal grease - your heatsink may not be seated properly, try to reseat your heatsink/fan and see what happens.
If all else fails, download something like the UBCD and run some diagnostics.
If any test fails, or at any point your system locks up or shuts down - you have a thermal issue or a hardware problem.
Last edited by R-D; Dec 25th, 2006 at 01:46 AM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules