• Last Updated:
  • Dec 25th, 2020 6:03 pm
Tags:
[OP]
Member
Dec 27, 2013
347 posts
115 upvotes
Toronto
Trader Score: 0

Arcade1Up Riser / Decal

Needed a riser for myself, and ended up building the skeleton for 3 risers out of a sheet of 1/2" MDF. So have two that others can use. All you need to do is add four 10.5" posts and two 20" supports made from 2x2's (which are 1.5"x1.5"), glue those one with wood glue, then paint whatever colour you want.

Basically this concept, but I didn't bother with the notch in the front. You can do that with a router or jigsaw if you're inclined.



$30 each. I used a brad nailer and wood glue instead of screws.

Also, I may order full Street Fighter decals from this place, they can send up to 3 at the same shipping cost.

https://www.etsy.com/ca/listing/7088252 ... e_18&crt=1

Pretty cool way to finish the risers, and we can split the shipping cost into 3 that way.

Check the 3:30 mark for the post sizes.
1 reply
[OP]
Member
Dec 27, 2013
347 posts
115 upvotes
Toronto
Trader Score: 0
Here is the riser on my SF machine.
Images
  • arcade1up.PNG

Top