Home & Garden

Grinder arbor adapter size looks wrong

  • Last Updated:
  • May 24th, 2020 2:14 pm
[OP]
Sr. Member
User avatar
Jul 26, 2008
766 posts
909 upvotes
Montreal

Grinder arbor adapter size looks wrong

Hi fellow grinders.

I have an old Mastercraft 4inch grinder 4 amps. When I put 4 1/2 cut off wheel with a 7/8 hole, I see a 2 mm gap between the disk and arbor nut / shim, in yellow
Image

Something tells me using the cutoff wheel like this in not safe, is there an adapter I can get ?

Image
4 replies
Deal Addict
Nov 6, 2014
1134 posts
1983 upvotes
0 downvotes (Maple,O…
You'll be fine....don't worry about it. Just center it up and tighten.
Jr. Member
User avatar
May 13, 2007
187 posts
85 upvotes
Lake of the Woods, N…
fordmaple wrote: You'll be fine....don't worry about it. Just center it up and tighten.
This is 'what not to do'! Completely foolish and VERY dangerous. Please find the proper nut with a flange that will center the disc .. and keep it centered.
Where There’s a Will, There’s a Way.
Deal Expert
User avatar
Sep 1, 2005
16682 posts
11411 upvotes
Markham
fordmaple wrote: You'll be fine....don't worry about it. Just center it up and tighten.
You're missing the spacer, there should be one and it's probably lost.

DO NOT FOLLOW THE ABOVE PERSON'S ADVICE.
We're all bozos on the bus until we find a way to express ourselves...

Failure is always an option...just not the preferred one!

Top

Thread Information

There is currently 1 user viewing this thread. (0 members and 1 guest)