Wheels and Tires

Putting Elantra tires on rim on Civic

  • Last Updated:
  • Aug 11th, 2020 11:40 am
[OP]
Newbie
Jul 25, 2020
2 posts

Putting Elantra tires on rim on Civic

Can Hyundra Elantra's tires (on rims) size 195 65 R 15 centre bore 67.1 mm and Rim 6J 15 ET46 fit my Honda Civic 2010 size 195 65 R 15 centre bore 64.1 mm and Rim 6J 15 ET45
5 replies
Member
Dec 1, 2009
268 posts
253 upvotes
You need to know if the bolt pattern matches. It will be something like 5 x 1_ _.
[OP]
Newbie
Jul 25, 2020
2 posts
Thanks. Bolt pattern matches but there is a difference in centre bore
Deal Guru
User avatar
Mar 13, 2004
13096 posts
4705 upvotes
Ontario
If they fit you would need hub rings to make up the space from 67.1 mm to 64.1 mm. Best to talk to a tire shop just to make sure.
Deal Fanatic
Oct 26, 2008
6838 posts
2615 upvotes
BC
You are probably using the Honda's lug nuts so you will want to make sure they interface properly with the Elantra's lug hole seat, and are the right length.

The offset is a very good match but I don't think that guarantees the studs project the same amount through the mounted wheel.

If you did have the Hyundai lug nuts and they used the same thread pitch as Honda, that might be the better option.
Deal Guru
User avatar
Jan 11, 2004
10123 posts
980 upvotes
Toronto
Not a good idea, the rim would be off balanced, rim would. Be depending on. Lugs only
"When operating the viewfinder diopter control with your eye to the viewfinder, care should be taken not to put your finger in your eye accidentally."

Top

Thread Information

There is currently 1 user viewing this thread. (0 members and 1 guest)