... that is screwed down over the carpet for sliding closet doors wasn't re-installed properly. The issue was that a screw was sticking out of the hole about 1/2"... the hole itself was now too large for the screw to bite, and the installer said there is a broken drill bit in the hole. I found ...
Oct 27th, 2021 3:11 pm
Walmart is delisting an adjustable 2/3 hole puncher in stores https://www.walmart.ca/en/ip/adjustable-2-3-hole-punch-black/6000199216204 (online price: $26.34) 6000201781865.jpg Where still available, the price has been set at 2 Cents. https://stocktrack.ca/?s=wm&upc=693520537068 ...
Oct 27th, 2021 12:39 am
YMMV - $31.25 in some stores Pfister Leen Black 1-Handle Single Hole 4-in Centerset WaterSense Bathroom Sink Faucet with Drain https://www.lowes.ca/product/bathroom-sink-faucets/pfister-leen-black-1-handle-single-hole-4-in-centerset-watersense-bathroom-sink-faucet-with-drain-valve-included-821384 ...
Sep 29th, 2021 10:09 am
... https://www.amazon.ca/LePage-Filla-Spackling-Repair-1256104/dp/B019GISJRW Versatile: Fill large holes and cracks up to 13mm deep; suitable for indoor and outdoor use Easy To Use: Spackle is easy to apply, spread, and feather to the edge; it cleans ...
Sep 22nd, 2021 8:55 pm
Hi. I just had my sojag Valencia steel top gazebo installed. And there is a hole close to the top 1/4 of the roof. It’s the size of a screw but It doesn’t appear to be from attached to anything so I don’t think it’s meant to be a missing screw hole. It also doesn’t ...
Aug 28th, 2021 8:20 pm
I'm going to be installing a new auto wind hose reel in my backyard and there are a bunch of existing holes in the brick where I plan to install it. Those holes have been filled with caulking. If I drill over into those holes with a drill bit to remove the caulking, will they ...
Jul 18th, 2021 11:21 am
I am trying with the ryobi multitool but cannot cut into the dry wall in ceiling. what is the best tool for this?https://i.imgur.com/r1Gl9BR.mp4
Jul 15th, 2021 10:46 am
Good price. Got a no name one from Amazon for 20$. Kind of regretting my purchase. These are very useful for cutting holes and what not.
Jun 18th, 2021 11:28 pm
Model # 49-22-4029 Store SKU # 1001168999 The 17 Piece MILWAUKEE HOLE DOZER Saw Set is engineered for longer life and faster cutting performance and is the most durable hole saw. Each of the 17 hole saws feature RIP GUARD teeth built with more steel behind ...
Jun 16th, 2021 9:46 pm
Any recommended product to use to fix the hole?
May 28th, 2021 9:56 pm
... it by an inch by cutting an inch the length of the glass insert. Can I cut both sides at the same time as I can clearly see both sides since the hole is already there. I'm guessing I'm going to have some sort of guide so that I can cut it straight. I also don't plan to take the door off when ...
May 25th, 2021 7:19 pm
Web store says deal expires May 5. Item is in weekly flyer for May 6 to May 12.
May 5th, 2021 9:46 pm
... and it needs to be raised slightly (measure twice, drill one someone once told me 😂) What would be the best caulk type substance to fill a brick hole so that it can be redrilled? The weight of the numbers are minimal.
May 1st, 2021 7:50 pm
... the gate will be hinged on the middle post on the property line, with a second post between the property line and house to latch the gate to. The hole for the middle post was hand dug by the contractor and the plastic gas line was found to just poke out from the edge of the hole. I just realized ...
Apr 16th, 2021 12:03 am
I just noticed it today, after a short 10min drive, I noticed some water drops near the exhaust system, so I checked under the car and saw a small hole. See pic below. Seems to have been drilled and not some kind of road hazard damage. Or is it from rusting? Can it be problematic?
Apr 8th, 2021 7:08 pm
Hello Would appreciate some views on the below issue. There is a hole that was left behind on an exterior wall after recent renovations. I think it was the old electrical wire entering into the basement. The electrical panel was moved to the other side, ...
Apr 8th, 2021 8:25 am
I needed a 2 1/8" hole drill to install a door lockset. Just the single hole bit runs from $15-21 at the major retailers. Canadian Tire has the 2 hole drills, mandrel and screw-on template for $14 on sale from $40. Ok, the template ...
Mar 24th, 2021 10:58 am
ALL links do not work anymore with Pi Hole enabled......... The worst part is people posting threads without pasting site in post. I cannot use loophole of quote and highlight and open in new tab........... problem fixed. mainly use google chrome. ...
Feb 9th, 2021 12:45 pm
I was setting something down on my well cap when my foot gave into the ground into a 1x1 foot space right beside the well casing. Initially I thought it was some kind of animal den but there didn't seem to be any other tunnels. The rest of the surface area seems fine. I filled it up with sand and th...
Jan 23rd, 2021 9:07 pm
The Milwaukee 9-Piece Bi-Metal General-Purpose HOLE DOZER Hole Saw Kit is engineered for longer life and faster cutting performance and is the Most Durable Hole Saw. The kit comes with 5 hole saw blades in 5 sizes: 1-Inch, 1-1/4-Inch, 1-1/2-Inch, ...
Jan 18th, 2021 10:31 am